160 lm LED path light · 12V · 2700K warm white · textured black · Kichler 15820BKT27
15820BKT27
341
– Loyalty Rewards
160 lm Path Light · 12V 2700K · Copper Finish · Kichler 15820CO27
12V integrated LED path light with 160 lm output and 2700K warm white colour temperature for walkways, garden beds, and patio edges. Copper construction suits low-voltage landscape systems; path lights in this size are typically used to create an even pool of light along paths, with actual spacing and light spread depending on mounting layout, transformer voltage, and site conditions.
What this product is for
This low-voltage landscape path light is used to illuminate walkways, planting beds, patios, and perimeter paths with a warm 2700K light output. It is an integrated LED fixture for 12V landscape lighting systems and is intended for outdoor wet-location installations.
Use for
Use for residential and light commercial landscape lighting where a warm, decorative path light is required. Common applications include front walks, garden paths, courtyard edges, and landscaped areas where a copper fixture is preferred for appearance and outdoor exposure.
Avoid for
Avoid using this fixture where a replaceable lamp is specifically required for maintenance standardization, or where line-voltage 120V luminaires are needed. It is also not the right choice for flood lighting, tree uplighting, or long-throw area lighting.
Best for
Best for contractors and homeowners building a 12V landscape lighting system with warm white pathway illumination and a decorative copper finish. It suits projects where consistent low-level path lighting is more important than high-output area lighting.
Installed in
Typically installed along sidewalks, stone paths, mulch beds, and patio borders in outdoor wet locations. The fixture height is approximately 22.5 in (572 mm) with a diameter of about 6.25 in (159 mm), which helps raise the light source above low plantings while maintaining pathway coverage.
Why this product exists
This product exists to provide a finished architectural path-light look in a low-voltage landscape system without requiring a separate lamp. The integrated LED source delivers warm white light with reduced maintenance compared with older lamp-based path lights.
Compared with similar products
Compared with line-voltage outdoor fixtures, this 12V model is intended for landscape systems using a remote transformer. Compared with higher-output bollards or spread lights, it is better suited to pathway definition and ambient landscape lighting. As typical guidance, path lights around this height are commonly spaced to create overlapping pools of light rather than wide-area coverage. Actual performance depends on installation conditions, fixture spacing, voltage drop, surrounding surfaces, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15820CO27
- Product type: Landscape LED path light
- System voltage: 12V
- Operating voltage: 9-15V
- Light output: 160 lm
- Colour temperature: 2700K
- Wattage: 2W
- Light source: Integrated LED
- Finish/material: Copper
- Location rating: Wet rated
- Fixture height: 22.5 in (572 mm)
- Fixture diameter: 6.25 in (159 mm)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From California USA