160 lm LED path light · 12V · 2700K warm white, textured architectural bronze · Kichler Lighting 15820AZT27
What this product is for
This low-voltage landscape path light is used to illuminate walkways, garden paths, planting beds, and outdoor transition areas with a warm 2700K light. It is an integrated LED fixture for 12V systems where a clean architectural look and low maintenance are preferred.
Use for
Use for residential pathways, landscaped borders, garden beds, and outdoor living areas where soft downward path-and-spread lighting is needed. It suits professional low-voltage installations using a compatible landscape transformer and burial cable.
Avoid for
Avoid using this fixture where lamp replacement is required as a maintenance strategy, or where a line-voltage 120V fixture is specified. It is also not the right choice when a narrow accent beam or tree-uplighting effect is needed.
Best for
Best for warm residential landscape lighting schemes, especially where textured architectural bronze hardware is being matched across the project. The approximately 23.2 in (589 mm) height is well suited to typical path-light applications that need light below eye level with broad ground coverage.
Installed in
Installed in soil or landscaped areas beside walkways, patios, garden edges, and entry paths as part of a 12V low-voltage outdoor lighting system. Wet-rated construction supports permanent outdoor exposure in Canadian conditions when installed to code.
Why this product exists
This fixture provides a simple stepped-dome path light format with integrated LED output, reducing relamping work while delivering warm-white wayfinding light. It is intended for contractors and landscape lighting installers who want a coordinated Kichler path-and-spread fixture in textured architectural bronze.
Compared with similar products
Compared with shorter path lights, this taller format can improve light spread over planting edges and wider walkways. Compared with replaceable-lamp landscape fixtures, this integrated LED model reduces ongoing lamp maintenance but does not offer field lamp changes. As typical guidance, path lights of this size are commonly spaced about 6 to 8 ft (1.8 to 2.4 m) apart so pools of light overlap. Actual performance depends on transformer sizing, cable run length, voltage drop, mounting height, and site layout.
Specifications
- Brand: Kichler Lighting
- Manufacturer part number: 15820AZT27
- Product family: Landscape LED
- Product type: LED path light
- Light output: 160 delivered lumens
- Colour temperature: 2700K warm white
- CRI: 80
- Voltage: 12V low voltage
- Operating range: 9V to 15V
- Wattage: 2W
- Fixture height: 23.2 in (589 mm)
- Diameter: 6.25 in (159 mm)
- Finish: Textured Architectural Bronze
- Material: Aluminium
- Light source: Integrated LED
- Rating: Wet rated
- Certification: cETLus
- Lamp life: 40,000 hours
- UPC: 783927430081
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks From California USA341 – Loyalty Rewards





