250 lm Path Light · 12V 3000K LED · Side-Mount Bronze Finish · Kichler 15815AZT30R
What this product is for
This Kichler side-mount path light is a 12V low-voltage landscape fixture for illuminating walkways, garden paths, planting beds, gates, and patio perimeters. The integrated 3000K LED provides warm white light, while the side-mount design helps direct light downward and outward with less glare than many top-mounted path lights.
Use for
Use for residential landscape lighting, pathway definition, garden edge lighting, and light commercial exterior applications where a warm 3000K appearance is preferred. It is suitable for wet locations and operates on 12V systems with a 9-15V operating range.
Avoid for
Avoid using this fixture where a replaceable lamp is required for future field servicing, or where higher-output area lighting is needed. It is not intended to replace flood, spot, or security lighting.
Best for
Best for contractors and landscapers who want a clean architectural look, directional path lighting, and compatibility with existing 12V landscape systems. The 20 in (508 mm) height and 6 in (152 mm) diameter shade size suit pathway and planting applications where controlled light distribution matters.
Installed in
Typically installed along sidewalks, front entries, garden borders, courtyard paths, and around patios. As a rule of thumb, path lights around 18-20 in high are commonly used to create comfortable pedestrian guidance rather than broad area lighting. Actual spacing, light spread, and brightness depend on fixture layout, beam pattern, surrounding surfaces, and voltage drop.
Why this product exists
This fixture is designed to provide low-voltage pathway illumination with a more directional side-mount form factor. It gives installers a way to reduce direct glare while maintaining a coordinated bronze landscape lighting finish.
Compared with similar products
Compared with centre-mount path lights, this side-mount design is intended for more directional lighting control. Compared with replaceable-lamp landscape fixtures, the integrated LED reduces lamp-change maintenance but does not offer a field-replaceable lamp. For low-voltage runs, a typical rule of thumb is to target no more than 10% voltage drop and size the transformer at approximately total fixture wattage multiplied by 1.25. Actual performance depends on cable length, conductor size, connections, and installation conditions.
Specifications
- Manufacturer part number: 15815AZT30R
- Brand: Kichler
- Product type: Low-voltage LED path light
- Mounting/design: Side-mount
- System voltage: 12V
- Operating voltage range: 9-15V
- Wattage: 4.3 W
- Light output: 250 lm
- Colour temperature: 3000K
- CRI: 80
- Finish: Textured Architectural Bronze
- Light source: Integrated LED
- Location rating: Wet
- Height: 20 in (508 mm)
- Diameter/width: 6 in (152 mm)
- Weight: 4 lb (1.8 kg)
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.