294 lm Path Light · 12V 2700K LED · Side-Mount Bronze Finish · Kichler 15815AZT27R
What this product is for
This low-voltage landscape path light is used to illuminate walkways, garden edges, planting beds, and patio perimeters in residential and light commercial outdoor installations. The side-mount head helps direct light where it is needed while reducing glare at eye level.
Use for
Use for 12V landscape lighting systems where warm white pathway illumination is required. It suits paths, entry approaches, landscaped borders, and outdoor amenity areas where a softer 2700K colour temperature is preferred.
Avoid for
Avoid using this fixture where a replaceable lamp platform is required for future field servicing, or where higher-output area lighting is needed. This is an integrated LED fixture, so it is not the right choice when you want to swap lamps instead of replacing the fixture assembly.
Best for
Best for contractors and homeowners matching textured architectural bronze landscape hardware and looking for a compact path light with directional output. It is also a practical fit where glare control matters more than maximum spread.
Installed in
Typically installed in soil or landscaped areas beside sidewalks, stone paths, mulch beds, and garden borders as part of a 12V AC low-voltage system. Wet-rated construction supports exposed outdoor use in Canadian weather conditions when installed to manufacturer instructions and local code.
Why this product exists
This fixture provides pedestrian-scale landscape lighting with lower energy use and a built-in LED light source. The side-mount design is intended to create more directional lighting without the harsher glare often associated with more open path light designs.
Compared with similar products
Compared with centre-mount path lights, this side-mount style is generally chosen for more directional output and reduced glare. Compared with replaceable-lamp low-voltage fixtures, this integrated LED model reduces lamp maintenance but offers less field-service flexibility. As a rule of thumb, path lights around 18 to 20 in (457 to 508 mm) high are commonly used to create pedestrian-scale pools of light along paths; actual spacing and light levels depend on layout, beam distribution, surface reflectance, and transformer loading.
For low-voltage runs, a typical rule of thumb is to target no more than about 10% voltage drop and size the transformer at total connected wattage multiplied by approximately 1.25. Actual performance depends on cable length, conductor size, connections, and installation conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 15815AZT27R
- Product type: Low-voltage LED path light
- System voltage: 12V
- Operating voltage range: 9-15 VAC
- Light source: Integrated LED
- Delivered lumens: 294 lm
- Wattage: 4.3 W
- Colour temperature: 2700K
- CRI: 80
- Delivered efficacy: 68 lm/W
- Finish: Textured Architectural Bronze
- Material: Aluminium
- Location rating: Wet
- Dimensions: 20 in H x 6 in dia. (508 mm H x 152 mm dia.)
- Volt-amperes: 5.8 VA
- UPC: 783927473866
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.