250 lm Path Light · 12V 3000K LED · Short Dome in Textured Architectural Bronze · Kichler 15811AZT30R
What this product is for
This low-voltage landscape path light is used to illuminate walkways, garden edges, and planting beds with a warm 3000K light output. The short dome profile is intended for lower planting and smaller garden areas where a taller path light may be unnecessary.
Use for
Use for 12V landscape lighting systems in residential and light commercial outdoor applications, including pathways, entry approaches, garden borders, and courtyard edges. It is suitable for wet locations and operates on 9-15V systems.
Avoid for
Avoid using this fixture where a replaceable lamp is required for future field servicing, or where higher-output area lighting is needed. It is not intended to replace flood, spot, or security lighting.
Best for
Best for contractors and landscape installers who need a compact integrated LED path light in a textured architectural bronze finish for lower shrubs, smaller beds, and defined pedestrian paths. Typical guidance for path lighting is to space fixtures based on the desired overlap and glare control rather than maximum brightness alone.
Installed in
Installed in outdoor low-voltage landscape systems along sidewalks, stone paths, mulch beds, and garden perimeters. The fixture measures 16 in H x 8.25 in dia. (approximately 406 mm H x 210 mm dia.), which helps when matching height to surrounding planting.
Why this product exists
This model provides a shorter alternative to Kichler's taller dome path light format, giving installers a better fit for lower planting zones while maintaining warm white pathway illumination. Integrated LED construction reduces lamp replacement requirements compared with lamped fixtures.
Compared with similar products
Compared with taller path lights, this short-stem design is better suited to smaller-scale landscape layouts and lower foliage. Compared with replaceable-lamp low-voltage fixtures, the integrated LED design simplifies fixture selection but does not offer lamp swapping in the field. As a rule of thumb, path lights around this height are commonly used to create comfortable walkway definition rather than broad area lighting. Actual performance depends on spacing, beam distribution, cable length, voltage drop, and local installation conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 15811AZT30R
- Product type: Low-voltage integrated LED path light
- Product family/style: Short Dome Path Light
- Application: Landscape path and spread lighting
- Input voltage: 12V, operating range 9-15V
- Light source: Integrated LED
- Delivered lumens: 250 lm
- Colour temperature: 3000K
- Power: 3 W
- CRI: 80
- Finish: Textured Architectural Bronze
- Material: Aluminium
- Location rating: Wet rated
- Dimensions: 16 in H x 8.25 in dia. (approximately 406 mm H x 210 mm dia.)
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.