250 lm Path Light · 12V · 3000K · Textured Black Dome · Kichler 15810BKT30R
What this product is for
This low-voltage landscape path light is used to illuminate walkways, planting beds, driveways, and outdoor circulation areas with a warm 3000K light. The integrated LED source and textured black dome-style fixture are suited to residential and light commercial landscape lighting systems operating on 12V.
Use for
Use for pathway edges, garden borders, entry approaches, and outdoor amenity areas where glare control and downward light distribution are preferred. It is commonly selected for coordinated Kichler landscape systems and for installations where a compact dome path light is required.
Avoid for
Avoid using this fixture where a replaceable lamp platform is specifically required, or where line-voltage 120V luminaires are needed. It is also not the right choice for flood lighting, tree uplighting, or applications requiring field-changeable beam spreads.
Best for
Best for contractors and landscape installers specifying a 12V integrated LED path light with warm white output, approximately 250 lumens, and a textured black finish that blends into planting areas and hardscape edges.
Installed in
Typically installed in low-voltage landscape lighting systems at homes, townhouse developments, commercial walkways, courtyards, and landscaped entrances. Typical path-light layouts aim for overlapping light patterns rather than isolated bright spots. As a rule of thumb, path lights around this size are often spaced to maintain consistent walkway illumination, but actual performance depends on fixture spacing, transformer sizing, cable run length, voltage drop, and local electrical code.
Why this product exists
This product provides decorative and functional path lighting from a compact integrated LED fixture, reducing lamp changes compared with replaceable-lamp designs. It is intended for low-voltage outdoor systems where energy use, appearance, and consistent colour temperature matter.
Compared with similar products
Compared with larger path lights, this fixture is suited to standard pathway and garden-edge lighting without the bulk of oversized decorative luminaires. Compared with replaceable-lamp landscape fixtures, the integrated LED design simplifies maintenance planning but does not offer lamp swapping. For longer cable runs in 12V systems, voltage drop should still be reviewed; a common rule of thumb is to target 10% or less voltage drop for more consistent light output.
Specifications
- Manufacturer part number: 15810BKT30R
- Brand: Kichler
- Product type: Low-voltage integrated LED path light
- System voltage: 12V
- Operating range: 9V to 15V
- Light output: approximately 250 lumens
- Wattage: approximately 3 W
- Colour temperature: 3000K
- CRI: approximately 80+
- Finish: Textured Black
- Style: Dome path light
- Material: Cast aluminium
- Location rating: Wet location
- Nominal shade size: 8 in (203 mm)
- Application: Pathways, gardens, landscape borders, driveways
Actual performance depends on installation conditions, transformer loading, cable length, voltage drop, fixture spacing, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.