160 lm Path Light · 12V 2700K LED · Textured Architectural Bronze · Kichler 15803AZT27R
What this product is for
This Kichler Forged path light is a 12V low-voltage landscape fixture for illuminating walkways, planting beds, garden paths, and outdoor approach areas. It uses an integrated 2700K LED light source and delivers up to 160 lumens in a textured architectural bronze housing.
Use for
Use for residential pathways, landscaped borders, courtyard paths, and similar outdoor areas where warm white guidance lighting is needed. The 26.5 in (673 mm) height helps lift light above lower plantings, and the 9-15V operating range suits standard low-voltage landscape systems.
Avoid for
Avoid using this fixture where a replaceable lamp is required for maintenance standardization, or where a broad flood distribution is needed for large open areas. This is a path and spread style fixture, not a flood or spot light.
Best for
Best for contractors and homeowners matching Kichler Design Pro landscape systems, especially where a mission-style forged look and warm 2700K output are preferred. It is also a fit for wet outdoor locations.
Installed in
Typically installed along walkways, garden paths, front entries, and landscaped perimeter beds on 12V low-voltage systems. As a rule of thumb, path lights around this height are commonly used to create comfortable spacing and wayfinding along pedestrian routes; actual light spread depends on mounting layout, surrounding surfaces, and planting density.
Why this product exists
This product exists to provide decorative pathway lighting with lower energy use than legacy halogen landscape fixtures while maintaining a substantial cast-aluminium appearance. The integrated LED design reduces relamping work in systems where long service intervals are preferred.
Compared with similar products
Compared with shorter path lights, this 26.5 in (673 mm) fixture is better suited where light needs to clear low shrubs or groundcover. Compared with replaceable-lamp landscape fixtures, the integrated LED format can reduce maintenance, but the light source is not field-swapped like a lamp-based fixture.
Specifications
- Brand: Kichler
- Manufacturer part number: 15803AZT27R
- Product family: Forged
- Product type: LED path light
- Application: Low-voltage landscape lighting
- Voltage: 12V
- Operating voltage: 9-15V
- Light output: 160 lm
- Colour temperature: 2700K
- Power: 2W LED module
- Total watts: approximately 3.8W listed by distributor sources
- CRI: 80
- Finish: Textured Architectural Bronze
- Material: Aluminium
- Dimensions: 8 in W x 8 in L x 26.5 in H (203 x 203 x 673 mm)
- Location rating: Wet rated
- Certification: cETLus listed
- Light source: Integrated LED
Typical guidance only: fixture spacing and perceived brightness depend on layout, transformer loading, cable run length, voltage drop, and surrounding landscape conditions.
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.