86 lm LED brick step light · 12V · 3000K · louvered textured architectural bronze · Kichler 15773AZT30R
What this product is for
This 12V LED brick step light is made for built-in outdoor wall and step lighting where a low, even spread of light is needed without excessive glare. It is commonly used in retaining walls, masonry stair risers, landscape walls and similar hardscape applications.
Use for
Use for brick walls during construction, vertical risers, outdoor steps, walkways, patio walls and other wet-location low-voltage landscape lighting installations. The louvered face helps direct light downward for wayfinding and visual comfort.
Avoid for
Avoid for retrofit jobs where no built-in wall cavity or construction access is available, and avoid using it on electronic transformers where the manufacturer notes it is not for use. It is also not the right choice where a replaceable lamp fixture is required for future lamp-only servicing.
Best for
Best for contractors and landscape installers who need a compact integrated LED brick light in a textured architectural bronze finish for coordinated hardscape lighting. It suits projects where warm 3000K light and a recessed, architectural appearance matter more than high lumen output.
Installed in
Installed in exterior brick or masonry walls, stair risers and retaining walls. Fixture size is 9.5 in W x 4 in H x 4 in D (approximately 241 x 102 x 102 mm), which helps when planning rough openings and wall integration.
Why this product exists
This product exists to provide low-level safety and accent lighting in hardscape applications using a low-voltage 12V system. Compared with surface-mounted fixtures, a built-in brick light keeps the fixture profile minimal while still marking steps and wall edges.
Compared with similar products
Compared with open-face step lights, the louvered face helps reduce direct view of the LED source. Compared with higher-output path or accent fixtures, this type is intended for close-range guidance lighting rather than broad area illumination. As a rule of thumb for low-voltage landscape systems, keep voltage drop to about 10% or less and size the transformer at roughly 125% of connected fixture wattage; actual results depend on cable length, conductor size, layout and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15773AZT30R
- Product type: LED brick light / step light
- System voltage: 12V low voltage
- Operating voltage: 9-15V AC/DC
- Light output: 86 lm max
- Colour temperature: 3000K
- CRI: 80
- Face style: Louvered
- Finish: Textured Architectural Bronze
- Housing material: Cast aluminium
- Dimensions: 9.5 in W x 4 in H x 4 in D (approximately 241 x 102 x 102 mm)
- Location rating: Wet rated / suitable for wet locations
- Mounting: Integrated into brick wall during construction; also usable in vertical risers
- Included: Stainless steel mounting hardware and junction box
- Electrical note: Wire connection must be made inside fixture
- Transformer note: Not for use with electronic transformers
- Warranty: 10-year / 40,000-hour warranty on LED driver and electrical components; 5-year warranty on aluminium housings and exterior finishes
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.