82 lm LED brick light · 12V · louvered textured architectural bronze · Kichler 15773AZT27R
What this product is for
This 12V low-voltage LED brick light is designed to be built into brick walls during construction and can also be used in vertical risers. It provides a low, even spread of warm 2700K light for step edges, stairways, retaining walls, and other outdoor transition areas.
Use for
Use for masonry step lighting, retaining wall lighting, stair risers, and other outdoor hardscape locations where a recessed low-voltage fixture is preferred. It suits residential landscape projects and light commercial exterior applications where glare control and a clean built-in appearance matter.
Avoid for
Avoid using this fixture where a surface-mount wall light, wide-area flood lighting, or a replaceable lamp fixture is required. It is not the right choice for retrofit locations without suitable brick or masonry integration space.
Best for
Best for contractors and landscape installers specifying a compact recessed step light with warm white output, integrated LED source, and a textured architectural bronze finish that blends into masonry and hardscape materials.
Installed in
Typically installed in exterior brick walls, masonry columns, retaining walls, and stair risers. The fixture body is approximately 9.5 in W x 4 in H x 4 in L (241 x 102 x 102 mm), so cavity planning should be confirmed before rough-in.
Why this product exists
This product exists to provide safer navigation and subtle architectural lighting in outdoor masonry applications without the look of a protruding fixture. The louvered design helps direct light downward and reduce direct view of the LED source.
Compared with similar products
Compared with open-face step lights, the louvered face offers better glare control. Compared with line-voltage wall fixtures, this 12V model is intended for low-voltage landscape systems operating from 9V to 15V. As a typical rule of thumb, low-output step and brick lights like this are commonly used for wayfinding and accent lighting rather than primary area lighting. Actual performance depends on spacing, mounting height, surface reflectance, and site conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 15773AZT27R
- Product type: LED brick light / step light
- System voltage: 12V low voltage
- Operating voltage: 9V to 15V
- Light source: Integrated LED
- Delivered light output: 82 lm
- Colour temperature: 2700K warm white
- Finish: Textured Architectural Bronze
- Face style: Louvered
- Location rating: Wet rated
- Nominal size: 9.5 in W x 4 in H x 4 in L (241 x 102 x 102 mm)
- Installation note: Designed to be integrated into brick wall during construction; also usable in vertical risers
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.