- Edmonton Stock: 17
:
from
to
Clear
Clear
Path Light · 12V Low Voltage · Aged Bronze Cotswold Lantern Style · Kichler 15422AGZ
SKU: 15422AGZ
12V low-voltage landscape path light in Kichler's Cotswold style with an aged bronze finish for walkways, garden beds, and outdoor living areas. This fixture is commonly used on low-voltage landscape systems with a replaceable lamp, which can simplify long-term maintenance compared with integrated LED fixtures.
What this product is for
This low-voltage path and spread light is used to illuminate walkways, planting beds, and outdoor gathering areas on 12V landscape lighting systems. The Cotswold lantern-style housing and aged bronze finish suit residential and light commercial exterior projects where decorative pathway lighting is required.
Use for
Use for pathway edges, garden borders, entry approaches, patios, and landscape accents where a softer spread of light is preferred over a high-output flood effect. It is a practical choice for contractors maintaining existing Kichler low-voltage systems or specifying a decorative path light with a replaceable lamp.
Avoid for
Avoid using this fixture where line-voltage luminaires are required, where integrated LED output is specifically requested, or where a compact bollard-style fixture would better suit the site. Do not use without a compatible 12V landscape transformer and suitable low-voltage cable.
Best for
Best for decorative pathway lighting in residential landscapes, courtyards, and outdoor amenity spaces where appearance matters as much as basic wayfinding. It is also well suited where serviceability is important, since replaceable-lamp path lights are often easier to maintain over time than sealed integrated fixtures.
Installed in
Typically installed in soil or landscaped areas beside paths, drive approaches, and garden beds as part of a 12V low-voltage outdoor lighting system. Path lights around this size are commonly spaced to create overlapping pools of light; as a rule of thumb, many path lights in the roughly 18 in to 26 in class are used to create approximately an 8 ft (2.4 m) light pattern depending on lamp, mounting height, and site conditions. Actual performance depends on lamp selection, spacing, layout, and local installation conditions.
Why this product exists
This fixture provides decorative low-voltage pathway lighting for projects that need a traditional lantern look rather than a modern integrated LED form factor. It gives installers a serviceable path light option in Kichler's Cotswold family with an aged bronze finish and cast aluminium construction.
Compared with similar products
Compared with integrated LED path lights, this model is better suited where replaceable lamp maintenance is preferred. Compared with simpler dome path lights, the Cotswold design is more decorative and is often selected for traditional landscape schemes. For longer low-voltage runs, typical landscape design practice is to manage voltage drop and keep it to about 10% or less; wire size and transformer loading should be selected accordingly.
Specifications
- Manufacturer part number: 15422AGZ
- Brand: Kichler
- Product family: Cotswold
- Product type: Low-voltage path and spread light
- System voltage: 12V
- Finish: Aged Bronze
- Construction: Cast aluminium
- Approximate height: 26 in (660 mm)
- Application: Landscape pathway and garden lighting
- Lamp style: Replaceable lamp design
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
95 lm LED T5 Wedge Base Replacement Bulb · 1.2W 2700K 12V · Replaces 10W Halogen · Brilliance LED BRI-MICRO-T5
BRI-MICRO-T5
Available to Order | Typically Arrives in 1 - 4 Weeks From Arizona Factory in USA30 – Loyalty Rewards- Edmonton Stock: 3
