- Edmonton Stock: 17
:
from
to
Clear
Clear
Path Light · 12V Low Voltage · Glass and Metal, Textured Architectural Bronze · Kichler 15317AZT
SKU: 15317AZT
12V low-voltage path light with a glass and metal body in a textured architectural bronze finish for walkways, garden beds, and patio perimeters. This fixture uses one S8 wedge-base lamp and is commonly selected where a decorative path light is preferred over an integrated LED fixture for easier lamp replacement.
What this product is for
This low-voltage landscape path light is used to illuminate walkways, planting beds, and outdoor living areas with a decorative side-distributed light effect. The fixture combines a glass disc with a metal cap and base in a textured architectural bronze finish.
Use for
Use for residential pathways, garden edges, patio approaches, and landscape areas where 12V lighting is already planned or installed. It suits projects where contractors want a serviceable fixture that uses a replaceable S8 wedge-base lamp rather than an integrated LED assembly.
Avoid for
Avoid for line-voltage installations, areas requiring a wide flood distribution, or projects where an integrated LED fixture is specifically required by the design standard. Confirm transformer capacity, cable sizing, and voltage drop before final fixture count is set.
Best for
Best for decorative path and spread lighting in higher-visibility landscape applications where fixture appearance matters as much as light output. It is also a practical choice when matching existing Kichler low-voltage landscape systems.
Installed in
Typically installed in soil or landscaped areas beside paths, drive approaches, and garden borders as part of a 12V outdoor lighting system. The fixture is approximately 22 in high x 7 in diameter (559 x 178 mm) and includes about 35 in (889 mm) of lead wire.
Why this product exists
This fixture is designed for projects that need a more architectural look than a basic dome path light while keeping the flexibility of a low-voltage lamped system. Replaceable-lamp landscape fixtures are commonly chosen to simplify future maintenance and lamp changes without replacing the full fixture.
Compared with similar products
Compared with integrated LED path lights, this model gives you lamp-service flexibility and easier field replacement. Compared with simpler stamped-metal path lights, it offers a more decorative glass-and-metal construction. As a typical rule of thumb, path lights around 18 to 22 in (457 to 559 mm) high are commonly used to define walking areas and create comfortable spacing along paths, but actual light spread depends on lamp choice, spacing, mounting location, and surrounding landscaping.
Actual performance depends on installation conditions, lamp selection, transformer loading, cable run length, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15317AZT
- Product type: Low-voltage path light
- System voltage: 12V; operating range 9V to 15V
- Lamp type: S8
- Socket: 1 wedge-base socket
- Lamp included: Yes, source listings indicate one lamp included
- Listed lamp wattage: 24.4W on distributor listing
- Finish: Textured Architectural Bronze
- Construction: Aluminium with glass
- Glass: Clear glass
- Dimensions: 22 in H x 7 in dia. (559 mm H x 178 mm dia.)
- Lead wire length: 35 in (889 mm)
- Location rating: Wet location / cUL 12V listing shown by distributor source
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceS8
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
