Landscape accent flood light · 120V line voltage · 1-lamp PAR30, textured black · Kichler 15241BKT
What this product is for
This 120V landscape accent flood light is used to highlight trees, walls, signage, and architectural details with a focused beam. It is a line-voltage fixture for installations where a 120V landscape system is preferred and a replaceable PAR30 lamp is required.
Use for
Use for cross-lighting, accenting, and grazing exterior surfaces in residential and light commercial landscape projects. Common applications include feature trees, stone walls, columns, façades, and other outdoor focal points.
Avoid for
Avoid where a low-voltage 12V system is required, where an integrated LED fixture is specified, or where beam spread and lamp output are not yet selected. This fixture requires a compatible PAR30 lamp and 120V branch circuit.
Best for
Best for contractors and maintenance teams who want a line-voltage landscape fixture with replaceable lamp flexibility. It suits retrofit work and projects where lamp choice can be adjusted for beam spread or output without replacing the full fixture.
Installed in
Typically installed in landscaped beds, around building perimeters, and in outdoor feature-lighting layouts. The fixture body is approximately 5 in W x 6.75 in H x 9 in L (127 x 171 x 229 mm), which helps when planning aiming clearance and fixture spacing.
Why this product exists
This product provides a 120V accent lighting option for applications that need directional landscape lighting without a separate low-voltage transformer. The replaceable-lamp format is commonly used where serviceability matters over the life of the installation.
Compared with similar products
Compared with integrated LED landscape accents, this fixture gives more flexibility for lamp replacement and beam selection, but actual light output depends on the PAR30 lamp chosen. Compared with 12V fixtures, it is intended for line-voltage layouts and should be installed accordingly. As typical guidance, smaller accent fixtures are commonly used for smaller trees and tighter highlighting zones; actual performance depends on lamp selection, aiming, mounting location, and site conditions.
Actual performance depends on installation conditions, lamp choice, layout, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15241BKT
- Product type: Landscape accent / flood light
- System voltage: 120V line voltage
- Lamp type: 1 x PAR30
- Base: E26 medium
- Maximum lamp wattage: 75W
- Lamp included: No
- Finish: Textured Black
- Housing material: Cast aluminium
- Lens: Tempered convex clear glass
- Location rating: Wet rated
- Dimensions: 5 in W x 6.75 in H x 9 in L (127 x 171 x 229 mm)
- Lead wire: 8 in (203 mm) usable 18 AWG leads
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.