Path Light · 120V Line Voltage · 25 in H x 9 in Dia · Eclipse Dome Cap · Kichler 15236BKT
What this product is for
This 120V line-voltage path and spread light is used for illuminating walkways, patio perimeters, and landscaped areas where a wider light pattern is needed. The Eclipse dome-cap design is intended for outdoor wet-location installations and uses a replaceable A19 lamp with an E26 medium base.
Use for
Use for residential and light commercial landscape lighting, pathway edges, garden transitions, and patio borders. It is a practical choice where line-voltage wiring is already available and where maintenance crews or homeowners may prefer a replaceable lamp instead of an integrated LED fixture.
Avoid for
Avoid for low-voltage 12V landscape systems, applications requiring an integrated LED engine, or locations where a narrow beam is preferred over a broad path-and-spread pattern. Also avoid where fixture spacing and glare control require a smaller shade profile.
Best for
Best for wider paths and patio areas. As a typical rule of thumb, larger path lights around 25 in (635 mm) high with a broad 9 in (229 mm) top are commonly selected when contractors want more lateral spread than compact accent path lights. Actual coverage depends on lamp wattage, mounting location, spacing, and surrounding surfaces.
Installed in
Installed in outdoor landscape beds, along walkways, beside patios, and in garden borders. Suitable for wet locations. Contractors should confirm mounting method, burial wiring method, and local code requirements for 120V outdoor branch-circuit installations.
Why this product exists
This model provides a line-voltage alternative for projects that do not use a low-voltage transformer system. It combines a decorative dome-cap appearance with a replaceable-lamp format, which can simplify future lamp changes and allow field selection of lamp type and colour temperature.
Compared with similar products
Compared with smaller path lights, this Eclipse model is designed to cast a wider spread across broader walking surfaces. Compared with integrated LED fixtures, it offers lamp replaceability and lamp-choice flexibility, but final efficacy and light colour depend on the A19 lamp installed. For many service applications, replaceable lamp fixtures can reduce long-term maintenance complexity. Actual performance depends on installation conditions, lamp selection, layout, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15236BKT
- Product family: Eclipse
- Product type: Path and spread light
- System voltage: 120V line voltage
- Lamp type: 1 x A19, replaceable
- Socket: E26 medium base
- Finish: Textured Black
- Material: Cast aluminium
- Location rating: Wet rated
- Dimensions: 25 in H x 9 in dia (635 mm H x 229 mm dia)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.