Path Light · 120V · 9.5 in H x 6 in Dia · Textured Architectural Bronze · Kichler 15205AZT
What this product is for
This 120V path and spread light is used to illuminate walkways, garden edges, and outdoor circulation areas with controlled downward light. The louvered three-tier top helps reduce glare while directing light onto the ground plane.
Use for
Use for line-voltage landscape lighting installations at homes, multi-residential properties, and light commercial sites where a 120V branch circuit is already available. Common applications include front walks, planting beds, patios, and pathway transitions.
Avoid for
Avoid for low-voltage 12V landscape systems, integrated LED layouts where matching LED colour and output across all fixtures is required, or applications where a mounting stem or bollard is needed but not separately specified. Bulb is not included.
Best for
Best for contractors and property owners who want a serviceable path light with a standard E26 medium base lamp and a traditional architectural bronze finish. It is also a practical choice where replaceable lamps are preferred for future maintenance.
Installed in
Installed in outdoor wet-location landscape lighting applications such as residential walkways, garden borders, courtyards, and entry approaches. Fixture body is approximately 9.5 in high x 6 in diameter (about 241 mm x 152 mm).
Why this product exists
This fixture provides a 120V path-lighting option for projects that do not use a low-voltage transformer system. The louvered top is designed to create a more shielded light pattern than open-top path lights, helping improve visual comfort along paths and landscaped areas.
Compared with similar products
Compared with low-voltage path lights, this 120V model is typically selected where line voltage is already present and transformer-based layout is not desired. Compared with integrated LED fixtures, it uses a replaceable lamp, which can simplify future relamping and allow field selection of lamp type and colour temperature. As a rule of thumb, path lights around this size are commonly used for pedestrian wayfinding and short-range area definition rather than wide-area site lighting. Actual light coverage depends on lamp choice, spacing, mounting, and site conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 15205AZT
- Product type: 120V path and spread light
- Collection / family: Six Groove
- Finish: Textured Architectural Bronze
- Voltage: 120V
- Lamp type: 1 x E26 medium base lamp, not included
- Maximum wattage: 75W
- Fixture dimensions: 9.5 in H x 6 in Dia (approximately 241 mm x 152 mm)
- Material: Aluminium
- Lens / diffuser: Clear polycarbonate
- Lead wire length: 30 in (approximately 762 mm)
- Location rating: Wet rated
- Mounting note: Mounting stem and bollard kit sold separately where required
- Volts120
- FinishTextured Architectural Bronze
- Light SourceA19
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.