- Edmonton Stock: 477
Underwater pond light · 12V MR16 lamp-ready · UL676 submersible · Kichler 15191BK
12V underwater pond light for ponds, fountains, and other water features, using one MR16 lamp with a BIPI socket. UL676 submersible approved with a 25 ft (7.6 m) lead wire; typically paired with a submersible-rated low-voltage transformer and a replaceable lamp for easier long-term maintenance.
What this product is for
This underwater pond light is designed for submerged accent lighting in ponds, fountains, and similar water features on a 12V low-voltage system. It is lamp-ready for one MR16 lamp and is intended to create focused lighting effects in or near water.
Use for
- Underwater pond and fountain lighting
- Highlighting waterfalls, spillways, and feature stones
- Low-voltage landscape lighting systems using a submersible-rated transformer
Avoid for
- Line-voltage installations
- Applications requiring an integrated LED fixture
- Installations without a properly rated submersible transformer and suitable low-voltage wiring
Best for
Best for contractors and landscape installers who want a replaceable-lamp underwater fixture for serviceable pond and fountain lighting. A replaceable MR16 lamp can simplify future maintenance compared with fully integrated fixtures.
Installed in
Commonly installed in residential and light commercial water features, including garden ponds, formal fountains, and decorative basins. The 25 ft (300 in / 7.6 m) lead wire helps with routing back to the transformer location.
Why this product exists
This fixture provides a dedicated submersible lighting option where standard landscape spot lights are not suitable. It is built for underwater use and supports focused accent lighting effects in water features while remaining on a 12V landscape lighting system.
Compared with similar products
Compared with above-water accent lights, this fixture is specifically rated for submersible use. Compared with integrated LED underwater fixtures, this lamp-ready design allows lamp replacement instead of replacing the full fixture. As a rule of thumb, replaceable lamp systems can reduce maintenance cost over time when lamp access and future servicing matter. Actual performance depends on lamp selection, beam spread, water clarity, installation depth, and transformer setup.
Specifications
- Product type: Underwater pond light / underwater accent light
- Voltage: 12V low voltage (operating range listed as 9-15V)
- Lamp type: 1 x MR16, BIPI socket
- Lamp included: No
- Maximum wattage: 50W
- Finish: Black
- Material: Thermoplastic composite resin / plastic housing
- Lens: Heat-resistant clear flat glass
- Submersible rating: UL676 submersible approved
- Lead wire length: 300 in (25 ft / 7.6 m)
- Approximate size: 5 in W x 6.17 in H x 5.5 in L (127 x 157 x 140 mm)
- Typical application note: commonly used with a submersible-rated Kichler Pro Series transformer or equivalent properly rated low-voltage transformer
- Volts12Vac
- FinishBlack Material (Not Painted)
- Light SourceMR16
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
