- Edmonton Stock: 43
Step Light · 12V Low Voltage · Louvered Face, Textured Architectural Bronze · Kichler 15072AZT
What this product is for
This low voltage recessed step light is designed to provide controlled illumination on outdoor steps, stair risers, deck skirts, and retaining walls. The louvered face helps direct light downward and reduce glare at eye level.
Use for
Use for 12V landscape lighting systems where you need safer footing and subtle wayfinding around stairs, landings, walkways, patios, and deck transitions. Commonly used in residential landscape lighting and light commercial exterior projects.
Avoid for
Avoid using this fixture where line-voltage 120V luminaires are required, or where an integrated LED fixture is specifically specified. It is also not the right choice for surface-mount applications because this model is intended for recessed installation.
Best for
Best for contractors and landscape installers who want a traditional low voltage step light with a replaceable lamp instead of an integrated LED module. This can simplify future maintenance because the lamp can be changed without replacing the full fixture.
Installed in
Typically installed in outdoor step risers, masonry walls, timber landscape features, deck fascias, and similar vertical surfaces. Fixture size is approximately 5 in W x 3.5 in H (127 x 89 mm), which helps when planning cut-in space and trim layout.
Why this product exists
This product exists to add low-level illumination exactly where pedestrians need it, while keeping the fixture compact and visually discreet. The louvered design helps soften the light output compared with an open-face step light.
Compared with similar products
Compared with integrated LED step lights, this fixture uses a replaceable T5 wedge-base lamp, which may suit maintenance-focused installations. Compared with open-face step lights, the louvered face is typically chosen where reduced glare is preferred. As a rule of thumb, low voltage step lights are commonly spaced by layout and sightline rather than by exact photometric coverage; actual results depend on mounting height, surface reflectance, and beam obstruction.
Actual performance depends on installation conditions, lamp selection, transformer capacity, cable run length, voltage drop, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15072AZT
- Product type: Recessed low voltage step light
- System voltage: 12V low voltage, operating range 9-15V
- Face style: Louvered
- Finish: Textured Architectural Bronze
- Fixture size: 5 in W x 3.5 in H (127 x 89 mm)
- Lamp type: T5
- Socket: Wedge base
- Lamp included: Yes, per manufacturer listing
- Installation: Recessed outdoor installation
- Included: Mounting hardware and junction box
- Application: Steps, decks, patios, stairways, retaining walls
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceT5
- MountingRecessed
- Width5"
- Depth2.5"
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 10








