- Edmonton Stock: 18
Mechanical Lug · 14 AWG to 2/0 AWG · 1-Conductor 1-Hole Aluminium Dual-Rated · Techspan LA2/0
Aluminium mechanical lug for one conductor with a 14 AWG to 2/0 AWG range and single-hole mounting. Dual-rated for copper or aluminium conductors, with a tin-plated body for lower contact resistance and corrosion protection in typical panel, equipment, and grounding terminations.
What this product is for
This mechanical lug is used to terminate one copper or aluminium conductor in electrical equipment where a bolted one-hole lug is required. It is commonly selected for panelboards, switchgear, disconnects, grounding points, and equipment terminations.
Use for
Use for one-conductor terminations from 14 AWG up to 2/0 AWG stranded, where a compact aluminium mechanical lug with one mounting hole fits the application. Suitable where electricians want a reusable set-screw style connector that can be installed with standard hand tools.
Avoid for
Avoid using this lug where a compression lug is specified, where conductor size falls outside the listed range, or where the equipment requires a different stud size, hole pattern, or conductor class. Always confirm compatibility with the equipment label and local electrical code.
Best for
Best for service, distribution, and equipment terminations needing a one-hole mechanical lug that accepts either copper or aluminium conductors. Also useful when field serviceability matters, since mechanical lugs are typically easier to remove and replace than compression styles.
Installed in
Typically installed in panels, meter bases, disconnects, control enclosures, wireways, and other electrical equipment with a bolted termination point. The body is approximately 1.47 in long (37 mm) with a width of about 0.63 in (16 mm), which helps in tighter equipment spaces.
Why this product exists
This lug provides a practical way to terminate a wide conductor range with one stocked part. The dual-rated aluminium body with tin plating is intended for use with copper or aluminium conductors, helping reduce inventory requirements for contractors and maintenance teams.
Compared with similar products
Compared with compression lugs, this mechanical lug is typically faster to install and easier to service in the field, though compression connections may be preferred where a crimped termination is specified. Compared with larger one-hole lugs, this model suits conductor sizes up to 2/0 AWG and uses a compact one-conductor body. Actual performance depends on conductor type, torque, installation conditions, and local electrical code.
Specifications
- Product type: Mechanical lug
- Brand: Techspan
- Manufacturer part number: LA2/0
- Conductor range: 14 AWG to 2/0 AWG stranded
- Conductor compatibility: Copper or aluminium
- Number of conductors: 1
- Mounting: 1-hole
- Stud / bolt size: 1/4 in to 17/64 in (approximately 6.4 to 6.7 mm, source-dependent listing format)
- Material: Aluminium alloy
- Finish: Tin-plated / electro-tin plated
- Voltage rating: 600 V AC
- Approximate dimensions: 1.47 in L x 0.63 in W x 0.80 in H (37 x 16 x 20 mm)
- Hex size: 3/16 in (4.8 mm)
- Approvals: UL/cULus and CSA listings shown by source listings
- Country of origin: United States on distributor listings
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 8
- Edmonton Stock: 188
- Edmonton Stock: 47
