Wall Mount Kit · For Votatec Architectural Linear Fixtures · 2 ft/4 ft/8 ft Compatible · Votatec LI-J-B001
LI-J-B001
7
– Loyalty Rewards
:
from
to
Clear
Clear
Emergency Remote Head · 2 x 7W · Double Head · Etlin Daniels ER270DWH-UD14
SKU: ER270DWH-UD14
Double emergency remote head for 6V to 12VDC systems with 2 x 7W lamp heads, white thermoplastic housing, and adjustable lockable heads. Commonly used to extend egress lighting from a compatible remote-capable emergency unit; actual run time and coverage depend on the connected battery unit, head aiming, and site conditions.
What this product is for
This emergency remote head is used to add additional lamp heads to a compatible remote-capable emergency lighting unit. It provides two adjustable 7W heads for indoor or damp-location emergency egress lighting where extra coverage is needed beyond the main unit.
Use for
Use for corridors, stairwells, service rooms, exits, and other commercial or institutional spaces where a central emergency unit supports remote heads. Suitable for wall or ceiling surface mounting to a standard electrical junction box.
Avoid for
Avoid using this as a standalone emergency light, as it requires a compatible remote-capable emergency unit with matching DC output. Do not use where the connected unit cannot support the 14W load or where a wet-location fixture is required.
Best for
Best for retrofit or new emergency lighting layouts that need more directional coverage from one battery unit. This double-head format helps direct light to two areas from one mounting point.
Installed in
Typically installed in commercial buildings, schools, apartment common areas, warehouses, and light industrial spaces. The housing is damp-location rated and designed for wall or ceiling mounting.
Why this product exists
Remote heads let installers extend emergency illumination without adding a full self-contained unit at every location. As a rule of thumb, remote heads are selected based on the battery unit's remote capacity, voltage, and required egress coverage. Actual performance depends on installation conditions, aiming, spacing, and local electrical code.
Compared with similar products
Compared with lower-wattage 1W or 5W remote heads, this 2 x 7W model draws more current and is typically chosen where higher light output is needed. It is intended for 6V to 12VDC systems, while newer universal-voltage variants in the same family may cover wider voltage ranges.
Specifications
- Product type: Emergency remote head
- Configuration: Double head
- Manufacturer part number: ER270DWH-UD14
- Brand: Etlin Daniels
- Voltage: 6V to 12VDC
- Lamp wattage: 2 x 7W
- Total power: 14W
- Maximum discharge current: 2500 mA
- Lumen output: 804 lm
- Colour: White
- Housing: Injection-moulded thermoplastic
- Reflector: Aluminium
- Lens: Clear polycarbonate
- Mounting: Wall or ceiling surface mount
- Head adjustment: Adjustable, lockable heads
- Dimensions: 8.90 in x 4.53 in (226 x 115 mm)
- Location rating: Damp location
- Certification: cCSAus
- Alternative toStanpro N2-12-24-7W-LA-WH
- BrandEtlin Daniels
- Warranty5 year
- Lighting Emergency
- Input Volts6V - 12V
- Wattage2 x 7 WATT 725(1450) LUMEN
- DurationNo Battery
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks Ships From Ontario Importer Warehouse
