- Edmonton Stock: 900
4-gang steel device box · 3 x 7-3/8 x 2-1/2 in. · with Loomex/NMD90 clamps · Vista 2104LLE4
4-gang non-gangable steel device box for flush wall installation of switches, receptacles or thermostats. This 2-1/2 in. deep box includes clamps for nonmetallic sheathed cable such as Loomex/NMD90 and provides 50 cu. in. capacity for multi-device rough-in.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 4-gang steel device box is used for flush wall installation of multiple wiring devices such as switches, receptacles and thermostats in residential and light commercial work. It is a non-gangable box with integral cable clamps for nonmetallic sheathed cable including Loomex and NMD90.
Use for
Use for multi-device wall rough-in where you need a 4-gang steel box with approximately 50 cu. in. capacity, 2-1/2 in. depth, and support for nonmetallic sheathed cable. Commonly used where consistent device alignment matters, with holding prongs and prepositioned depth tabs helping during installation.
Avoid for
Avoid for applications requiring a gangable box, weatherproof box, masonry box, or conduit knockout style box for raceway systems. Also avoid where box fill calculations exceed the actual installed conductor and device volume allowed by the Canadian Electrical Code.
Best for
Best for residential and renovation rough-in where electricians need a ready-to-install 4-gang steel box for flush-mounted devices and Loomex/NMD90 cable entry. It suits standard stud wall work where a steel box is preferred over nonmetallic alternatives.
Installed in
Typically installed in framed walls in houses, apartments and light commercial spaces. The box measures 3 x 7-3/8 x 2-1/2 in. (approximately 76 x 187 x 64 mm), making it suitable where wall depth can accept a 2-1/2 in. deep steel device box.
Why this product exists
This box provides a straightforward way to mount four devices in one flush wall location while keeping cable entry and box support in a single steel assembly. The hot dipped galvanized steel construction helps resist corrosion during storage, handling and installation.
Compared with similar products
Compared with shallower or smaller gang boxes, this model offers 50 cu. in. total capacity for 4-gang layouts. As typical guidance only, larger multi-gang boxes can simplify conductor management and device spacing, but actual box fill depends on conductor size, connectors, device count and local code requirements.
Actual performance depends on installation conditions, conductor count, device depth, layout, and local electrical code.
Specifications
- Product type: 4-gang steel device box
- Brand: Vista
- Manufacturer part number: 2104LLE4
- Material: Steel, hot dipped galvanized sheet
- Box style: Non-gangable, flush device box
- Cable entry: Clamps for nonmetallic sheathed cable such as Loomex/NMD90
- Dimensions: 3 x 7-3/8 x 2-1/2 in. (approximately 76 x 187 x 64 mm)
- Depth: 2-1/2 in. (approximately 64 mm)
- Capacity: 50 cu. in. (approximately 819 mL)
- Application: Switches, receptacles, thermostats
- Installation features: Holding prongs and prepositioned depth tabs
- Country of origin: Canada
- Gang4 Gang
- ColourGalvanized
- Used InWood Frame
- Capacity50 Cubic Inches
- Similar ToBC2104-LLE-4
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 7
- Edmonton Stock: 177
- Edmonton Stock: 60
- Edmonton Stock: 49
- Edmonton Stock: 167
- Edmonton Stock: 162
- Edmonton Stock: 99
- Edmonton Stock: 311
