- Edmonton Stock: 1103
Inground Uplight · 12V MR16 · Solid Brass Housing · Axite Lighting Canada BR-UL1
What this product is for
This inground uplight is used in 12V low-voltage landscape lighting systems where a flush, below-grade fixture is needed for upward accent lighting. It is built around a replaceable MR16 lamp platform, which helps contractors choose beam spread, colour temperature, and lumen package separately to suit the site.
Use for
Use for uplighting trees, shrubs, columns, stone walls, façades, monuments, and exterior signage in residential and light commercial projects. It is a practical choice where the fixture should stay visually discreet at grade level while directing light upward.
Avoid for
Avoid where an integrated LED fixture is specifically required, where line-voltage fixtures are specified, or where lamp and beam selection must be factory-fixed. Also avoid assuming lamp output is included unless the selected listing confirms the MR16 lamp is supplied.
Best for
Best for contractors and landscape installers who want a serviceable inground fixture with a replaceable MR16 lamp format. This style is commonly preferred when future lamp changes, beam changes, or colour temperature changes may be needed without replacing the full fixture.
Installed in
Typically installed in landscaped beds, gravel areas, or other grade-level exterior locations as part of a 12V landscape lighting system. Final installation method, drainage, burial practice, and transformer sizing should follow manufacturer instructions and local electrical code.
Why this product exists
This product provides a low-profile way to create upward accent lighting from ground level while using a solid brass body for corrosion resistance in outdoor environments. The MR16 format gives flexibility to match the lamp to the application instead of locking the project into one fixed output.
Compared with similar products
Compared with integrated LED inground fixtures, this MR16 version is easier to service and re-lamp. Compared with grate-style inground fixtures, this BR-UL1 version is the standard solid brass inground uplight format rather than the grate variant. As a rule of thumb for low-voltage landscape systems, transformer sizing is typically calculated at total connected wattage multiplied by approximately 1.25, and longer runs may require heavier cable to manage voltage drop. Actual performance depends on lamp wattage, run length, layout, and site conditions.
Specifications
- Product type: Inground uplight
- System voltage: 12V low voltage
- Lamp format: MR16 replaceable lamp
- Construction: Solid brass housing
- Application: Landscape and architectural uplighting
- Mounting style: Inground / flush-with-grade style fixture
- Typical uses: Trees, walls, columns, façades, signage, garden features
- Warranty: 5 year
- Weight: 3.08 lb (approximately 1.4 kg)
- Buying note: Light output, beam spread, and colour temperature depend on the MR16 lamp selected
- Not IncludedMR16 Lamp
- Volts12Vac
- Watts50 Watt Halogen
- FinishBrass
- Package Qty6
- PackagingCarton
- Light SourceMR16
- Beam AngleLamp Dependent
- MountingInground
- Diameter4.5"
- Height5"
- RatingsWet Locations
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 8
- Edmonton Stock: 608
- Edmonton Stock: 5
Landscape Lighting Transformer · 150W · Black Finish · Axite FD-150-BLK
FD-150-BLK
299 – Loyalty Rewards- Edmonton Stock: 352
MT-0-BLK Axite Landscape Lighting Monet Spot Light 12V MR16 Black-Made In Canada
MT-0-BLK
160 – Loyalty Rewards- Edmonton Stock: 21













