- Edmonton Stock: 352
Landscape Lighting Transformer · 300W · Stainless Steel Housing · Axite Lighting FD-300-SS
What this product is for
The FD-300-SS is a 300W landscape lighting transformer used to supply low-voltage outdoor lighting systems. It is intended for contractors and installers building or servicing 12V landscape lighting on residential and light commercial projects.
Use for
Use for powering low-voltage path lights, spot lights, accent lights, and other compatible landscape fixtures where a 300W transformer is the right system size. The stainless steel enclosure suits outdoor locations where corrosion resistance is important.
Avoid for
Avoid using this transformer where a line-voltage lighting system is required, where the connected load exceeds 300W, or where a DC driver is needed instead of an AC landscape transformer. Do not assume smart controls, photocell, timer, or multi-tap outputs unless confirmed for the exact installation.
Best for
Best for medium to larger low-voltage landscape lighting layouts that need a straightforward 300W power supply in a stainless steel cabinet. It is a practical choice for Canadian outdoor projects where weather exposure and enclosure material matter.
Installed in
Typically installed on exterior walls, posts, service areas, garages, landscape structures, or other suitable mounting points near the lighting zone. For planning purposes, low-voltage landscape systems are commonly sized with transformer capacity at about 125% of total connected wattage, and longer runs may require attention to voltage drop. Actual performance depends on installation conditions, cable size, run length, fixture load, insulation, layout, and local electrical code.
Why this product exists
This product provides a central low-voltage power source for landscape lighting while offering a stainless steel enclosure for outdoor service. It helps installers build cleaner, serviceable systems without using multiple small plug-in power supplies.
Compared with similar products
Compared with smaller transformers, a 300W unit gives more capacity for additional fixtures or longer runs before moving up to a larger cabinet size. Compared with painted steel housings, stainless steel is commonly selected where corrosion resistance and outdoor appearance are priorities. If your connected load is modest, a smaller transformer may be more appropriate; if expansion is expected, confirm whether a higher wattage model is the better fit.
Specifications
- Product type: Landscape lighting transformer
- Power rating: 300W
- Application: Low-voltage landscape lighting
- Housing material: Stainless steel
- Installation: Outdoor landscape lighting power supply
- Brand: Axite Lighting
- Manufacturer part number: FD-300-SS
- Approximate product weight: 7 lb (3.2 kg)
- Typical buying guidance: Often used where total connected fixture load is kept below rated capacity with design headroom
- Watts300W
- FinishStainless Steel
- Mounting TypePost or Wall Mount
- Volts12 Vac
- TypeMagnetic
- LocationOutdoor
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Troubleshooting a landscape transformer
Step 1. Is there 120V power at the outlet it's connect to? Plug something in that can confirm it is a powered plug, testing with voltage meter is preferred.
i. GFI tripped?(Press the rest button)
Note: Outside electrical circuits often have 1 GFCI located outside that protectes the other outside circuits. If the outlet your transformer is plugged into is not a GFCI, then take a quick walk around the house and property to locate the GFCI and then reset it. (90% of the time this is the issue, and remember GFCI's should be replaced every 10 years for safety).
ii. Circuit breaker in panel could have tripped?

Step 2. Check the mini circuit breaker inside the landscape transformer(Locations and reset handle colour may be different than show).
Note: to test this simply toggle the white handle of the breaker on and off. Make sure the timer(if present) is in the on position and the photocell(if present) is by-passed by covering the sensor portion properly. Test power at 12V side on the lugs with a volt meter.
Step 3. If the mini circuit breaker keeps tripping to the off position
i. If breaker trips slowly(2 - 30 seconds); calculate the transformer load (80% max load of wattage of transformer, so add up the wattage of all light bulbs connected to the unit).
ii. If breaker trips fast; ensure there are no breaks in the wire(typically from doing digging in the garden after some time of it running), this entails running you hand along every wire to make there are no nicks or cuts in the wire that could cause a short circuit. Note: Look for places that may have had work done recently in the yard.
Step 4. Visually inspect low voltage wires and lugs inside and outside of the landscape transformer
i. Ensure there are no signs of overheating or short circuits inside the unit
ii. Ensure solid connections in lugs
iii. If only some lights are working: Check connection where the last light worked. Check wire from last running light to first not working light. There will be a break or cut on the wire from work being done in the yard. If these are all good, check connections in future, lamp socket and connectors in stem or base.
Related products
- 160 – Loyalty Rewards
- Edmonton Stock: 1103
- Edmonton Stock: 5
- Edmonton Stock: 21
- Edmonton Stock: 5
- Edmonton Stock: 5
- Edmonton Stock: 1












