Path Light · 120V Line Voltage · 25 in H x 9 in Dia · Textured Tannery Bronze · Kichler 15236TZT
What this product is for
This 120V line-voltage path light is used to illuminate walkways, garden paths and patio edges where a wider light spread is needed. The larger 9 in (229 mm) Eclipse dome helps distribute light across broader paths and outdoor living areas.
Use for
Use for line-voltage landscape lighting layouts, retrofit replacements on existing 120V circuits, and installations where a replaceable A19 lamp is preferred for easier maintenance. Suitable for wet-location outdoor applications where a CSA/UL wet rating is required.
Avoid for
Avoid for low-voltage 12V systems unless the circuit is specifically 120V line voltage. Avoid where an integrated LED fixture is required by project standard, or where lower-wattage accent lighting would be more appropriate than a wider path-and-spread distribution.
Best for
Best for wider walkways, patios and landscape areas that benefit from broader illumination from a dome-cap path light. For trade planning, path lights around this size are typically selected when more coverage is needed than compact accent fixtures, but actual spacing and light levels depend on lamp choice, mounting layout and site conditions.
Installed in
Installed in residential landscapes, hospitality exteriors, pedestrian paths, courtyard edges and patio perimeters. Commonly used in hardscape and softscape areas where a bronze finish blends with earth-tone exterior materials.
Why this product exists
This fixture gives contractors a 120V alternative to low-voltage path lighting when a transformer is not desired or when replacing existing line-voltage landscape fixtures. The replaceable-lamp format can reduce long-term maintenance cost compared with sealed integrated fixtures because the lamp can be changed without replacing the full housing.
Compared with similar products
Compared with smaller path lights, this 25 in (635 mm) high fixture with a 9 in (229 mm) diameter dome is intended to cast a wider spread over broader paths or patios. Compared with integrated LED fixtures, it uses a standard medium-base A19 lamp, which offers lamp flexibility but depends on the selected bulb for output, wattage and colour temperature.
Typical guidance only: actual performance depends on lamp selection, installation conditions, spacing, surrounding surfaces and local electrical code.
Specifications
- Product family: Eclipse
- Type: Path and spread light
- Voltage: 120V line voltage
- Lamp type: 1 x A19, medium base E26
- Maximum wattage: 75W
- Lamp included: No
- Finish: Textured Tannery Bronze
- Material: Aluminium
- Dimensions: 25 in H x 9 in dia. (635 mm H x 229 mm dia.)
- Lead wire length: 6 in (152 mm)
- Location rating: CSA UL Listed Wet
- UPC: 783927118576
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.