Cat 6 U/UTP Ethernet Cable · 23 AWG 4-Pair Solid Copper · FT4/CSA 1000 ft (305 m) Blue · Cable Concepts Datacomm WICH2106BL
What this product is for
This Cat 6 U/UTP bulk cable is used for structured cabling, Ethernet data runs, voice and data systems, and other low-voltage network installations. It is supplied in a 1000 ft (305 m) length for larger jobs, multi-room pulls, and contractor stock.
Use for
- Horizontal LAN cabling in offices, retail, institutional, and residential projects
- Gigabit Ethernet and typical Cat 6 data applications
- Patch panel to outlet runs where solid conductor bulk cable is required
- Colour-coded blue cable identification in telecom and data rooms
Avoid for
- Plenum spaces where FT6/CMP cable is required instead of FT4
- Applications needing shielded cable for higher EMI environments
- Flexible patch cord use, where stranded patch cable is typically preferred
Best for
Best for electricians, data contractors, and integrators needing a standard blue Cat 6 bulk cable with solid bare copper conductors and Canadian FT4/CSA compliance for in-building network cabling.
Installed in
Typically installed in walls, ceilings, conduits, cable trays, telecom rooms, and structured cabling pathways in commercial, institutional, and residential buildings, subject to local code and installation requirements.
Why this product exists
This cable provides a standard Cat 6 backbone for reliable in-building data transmission while meeting common Canadian flame-rating requirements. The 1000 ft (305 m) bulk format helps reduce waste and supports longer multi-run installations.
Compared with similar products
Compared with Cat 5e, Cat 6 is commonly selected where higher performance headroom is desired for modern network installations. Compared with plenum cable, this FT4/CSA version is intended for general in-building use where plenum rating is not required. Compared with shielded cable, U/UTP is simpler to terminate and is commonly used where electromagnetic interference is not a major concern.
Typical guidance only: solid copper Cat 6 bulk cable is commonly chosen for permanent horizontal runs, while stranded cable is typically used for patch leads. Actual performance depends on installation conditions, termination quality, pathway fill, bend radius, and local electrical code.
Specifications
- Category: Cat 6 U/UTP Ethernet cable
- Part number: WICH2106BL
- Brand: Cable Concepts Datacomm
- Conductor size: 23 AWG
- Pairs: 4 pair
- Conductor material: Solid bare copper
- Jacket: PVC
- Flame rating: FT4/CSA
- Colour: Blue
- Length: 1000 ft (305 m)
- Operating temperature: -20 to 75°C (-4 to 167°F)
- Minimum bend radius: 1/4 in
- Size#23AWG
- Conductors4Pair
- Roll Size305 M
- TypeCAT6
- Jacket ColourBlue
- Operating Temperature Range-20 to +75
- Installation Temperature Range0 to +60
- BrandCable Concepts Datacomm
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Blank Rack Panel · 1U · 19 in Rack Width · Cable Concepts Datacomm CMCD0036
CMCD0036
16 – Loyalty RewardsSlim downlight mounting plate · 4 in opening · with extendable arms · Synco NCMP4
NCMP4
Available to Order | Typically Arrives in 1 - 3 Weeks5 – Loyalty Rewards- Edmonton Stock: 101












