In-Wall Fan-Forced Heater · 240/208V 1000/750W · White Grille · King Electric WHF2410-W
WHF2410
349
– Loyalty Rewards
:
from
to
Clear
Clear
In-Wall Fan-Forced Heater · 240/208V 1500/750W · White Grill · King Electric WHF2415-W
SKU: WHF2415
Fan-forced in-wall heater rated 1500W at 240V and 1125W at 208V, with dual-element 1500/750W operation and a white grill. Typically used for small rooms, entries, offices, and supplemental heat zones; as a rule of thumb, 1500W electric heat covers approximately 130 to 180 sq ft (12 to 17 m²), depending on insulation, ceiling height, and heat loss.
What this product is for
The King Electric WHF2415-W is a fan-forced in-wall electric heater for recessed wall installation where quick-response supplemental heat is needed. It is commonly selected for bedrooms, offices, hallways, entries, small living areas, and similar spaces that benefit from directed warm-air output.
Use for
Use for 240/208V electric heating circuits in residential and light commercial spaces where wall-mounted fan heat is preferred over baseboard. Typical applications include small rooms, retrofit replacements, and areas where faster heat delivery is useful.
Rule of thumb: a 1500W electric heater is commonly used for approximately 130 to 180 sq ft (12 to 17 m²) in a reasonably insulated space. Actual performance depends on installation conditions, insulation, layout, ceiling height, and local electrical code.
Avoid for
Avoid using this heater as the sole heat source for large open areas, poorly insulated rooms, or spaces requiring washdown, outdoor, or hazardous-location equipment. It is also not the right choice where a ceiling-mounted or surface-mounted heater is required instead of an in-wall unit.
Best for
Best for electricians and contractors needing a compact in-wall heater with standard white finish, dual-wattage element arrangement, and 240/208V compatibility for spot or zone heating.
Installed in
Installed recessed in a wall using the appropriate wall can/accessory enclosure. Commonly installed in wood-frame or finished wall assemblies in houses, suites, offices, and similar indoor conditioned spaces.
Why this product exists
This model exists to provide faster perceived heat than passive baseboard-style heaters by using a fan-forced airflow pattern. It suits projects where wall space is available and occupants want quicker warm-up in smaller zones.
Compared with similar products
Compared with baseboard heaters, this in-wall fan-forced heater can deliver heat more quickly into the occupied space. Compared with larger wall heaters, the 1500W size is better suited to smaller rooms and branch circuits sized for this load. On a 240V circuit, the heater draws about 6.2A at full 1500W output; continuous-load circuit sizing should still follow applicable code and equipment instructions.
Specifications
- Manufacturer: King Electric
- Manufacturer part number: WHF2415-W
- Series: WHF
- Product type: In-wall fan-forced heater
- Voltage: 240/208V
- Wattage: 1500/750W at 240V; 1125/562W at 208V
- Current: 6.2/3.1A at 240V; 5.4/2.7A at 208V
- Finish/colour: White
- Mounting: Recessed wall mount
- Airflow: Approximately 75 CFM
- Coverage guidance: Approximately 130 to 180 sq ft (12 to 17 m²) as a typical rule of thumb for 1500W electric heat
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks- Edmonton Stock: 2
- Edmonton Stock: 2
- Edmonton Stock: 750
- 1% off trade
- Edmonton Stock: 7
