Precision Screwdriver Set · 7-Piece Slim Electronics Set · Cabinet and Phillips Tips · IDEAL Industries 36-248
What this product is for
The IDEAL Industries 36-248 is a 7-piece precision screwdriver set for electrical, electronics, and control work where small fasteners, narrow access, and tip fit are important. It includes slim cabinet-tip and Phillips drivers commonly used on terminals, devices, panels, and electronic assemblies.
Use for
- Control panels and instrumentation
- Terminal screws and small device fasteners
- Electronics service and bench work
- Electrical components requiring narrow cabinet tips
- Reaching deeper screws with 4 in and 6 in shanks (102 mm and 152 mm)
Avoid for
- High-torque fastening on larger screws
- Striking or prying applications
- Live-line insulated tool applications unless a separately rated insulated tool is specified
- General-purpose heavy mechanical fastening
Best for
Best for electricians, panel builders, maintenance technicians, and electronics technicians who need a compact set of small-profile drivers instead of full-size cabinet or demolition screwdrivers.
Installed in
Typically used in shop, bench, panel, and service environments rather than being installed into a system. Common applications include control cabinets, low-voltage assemblies, devices, and electronic equipment.
Why this product exists
Precision screw heads and recessed terminals need smaller tips and slimmer shanks than standard screwdrivers provide. This set gives a practical range of common electronics and light electrical sizes in one kit, helping reduce cam-out on small screws when the correct tip is selected.
Compared with similar products
Compared with standard screwdriver sets, this electronics set focuses on smaller tip sizes and longer slim shanks for access and control. It is a better fit for precision fastening, but not a substitute for insulated drivers or larger torque applications.
Specifications
- Manufacturer part number: 36-248
- Brand: IDEAL Industries
- Product type: Precision/electronics screwdriver set
- Set size: 7 pieces
- Included tips: (1) Phillips #0 with 2-1/2 in shank (64 mm)
- Included tips: (2) cabinet 3/32 in with 2-1/2 in and 3 in shanks (64 mm and 76 mm)
- Included tips: (2) cabinet 1/8 in with 4 in and 6 in shanks (102 mm and 152 mm)
- Included tips: (2) cabinet 5/32 in with 4 in and 6 in shanks (102 mm and 152 mm)
- Blade/shank material: chrome vanadium steel / polished chrome vanadium steel, depending on listing
- Application: precision electrical and electronics fastening
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.