1100 Lumens 12W Watts A19 Frosted LED 2700K/3000K/3500K/4000K/5000K Medium Base Satco Lighting S11792
What this product is for
This A19 LED lamp is used to replace a 75W incandescent lamp in standard medium-base fixtures on 120V circuits. It provides 1100 lumens with field-selectable colour temperature settings of 2700K, 3000K, 3500K, 4000K, or 5000K, making it useful where the final light appearance needs to be chosen during installation.
Use for
Use in table lamps, ceiling fixtures, wall lights, enclosed fixtures, and other E26 medium-base luminaires rated for A19 lamps. Suitable for residential rooms, common areas, and light commercial spaces where dimming and colour selection are required.
Avoid for
Avoid using where a non-standard base, higher voltage, directional beam, or outdoor wet-location lamp is required. Also avoid applications where the fixture or control is not compatible with dimmable LED lamps.
Best for
Best for service work, tenant improvements, and stock-room use where one lamp can cover multiple colour temperature preferences. It is also a practical choice for enclosed fixtures because this model is rated for enclosed use.
Installed in
Typically installed in E26 medium-base fixtures with an A19 lamp envelope measuring approximately 4.57 in overall length x 2.36 in diameter (116 x 60 mm). Rated for damp locations and for operation from -4°F to 104°F (-20°C to 40°C).
Why this product exists
This lamp reduces the need to stock multiple A19 colour temperatures by combining five CCT options in one SKU. For retrofit work, 1100 lumens is typically used where a 75W incandescent lamp would have been installed, helping reduce energy use while maintaining familiar light output.
Typical guidance only. Actual light levels and dimming performance depend on fixture design, control compatibility, and site conditions.
Compared with similar products
Compared with fixed-CCT A19 lamps, this model gives more flexibility at installation. Compared with non-dimmable lamps, it allows light-level adjustment when paired with a compatible dimmer. It also adds enclosed-fixture suitability, which is an important buying point for many decorative and flush-mount fixtures.
Specifications
- Manufacturer part number: S11792
- Brand: Satco Lighting
- Product type: LED A19 lamp
- Wattage: 12W
- Voltage: 120V
- Incandescent equivalent: 75W
- Light output: 1100 lm
- Colour temperatures: 2700K / 3000K / 3500K / 4000K / 5000K
- CRI: 90+
- Dimmable: Yes
- Base: E26 medium
- Shape: A19
- Finish: Frosted white
- Beam spread: 220°
- Rated life: 25,000 hours
- Enclosed fixture rated: Yes
- Location rating: Damp
- Operating temperature: -20°C to 40°C (-4°F to 104°F)
- Dimensions: 4.57 in L x 2.36 in dia. (116 x 60 mm)
- Listings: cULus listed, RoHS compliant, FCC compliant
- Warranty: 5 years
- BrandSatco Lighting
- Warranty5 year
- Lamps
- Lumens1100
- Watts12W
- Color Temperature2700K/3000K/3500K/4000K/5000K
- Volts120V
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.