500 Lumens 6.5 Watts PAR16 LED Lamp 3K Satco Lighting S9388
What this product is for
This PAR16 LED lamp is used for directional lighting where a compact reflector lamp with a medium E26 base is required. It delivers 500 lumens, 3000K warm white light, and a 40° beam spread for focused general, accent, or display lighting on 120V circuits.
Use for
Use for track heads, recessed fixtures, display lighting, retail accents, and residential spot or flood applications that accept a PAR16 lamp with an E26 medium base. It is suitable for damp locations and enclosed fixtures where the lamp rating matches the installation.
Avoid for
Avoid for fixtures requiring GU10, MR16, or other non-E26 lamp bases. Do not use where a wider flood pattern, higher lumen package, or non-dimmable control compatibility is required without confirming dimmer and fixture compatibility first.
Best for
Best for electricians and maintenance buyers replacing small halogen PAR16 lamps with an LED option that reduces wattage while maintaining a familiar beam pattern. Typical applications include accent lighting, cabinet-adjacent directional lighting, and small-scale commercial displays.
Installed in
Installed in 120V indoor fixtures, including recessed cans, track lighting, display heads, and other luminaires designed for PAR16 E26 medium-base lamps. Maximum overall length is approximately 2.88 in (73 mm) with a diameter of about 2 in (51 mm), so it fits compact lamp positions where PAR16 size matters.
Why this product exists
This lamp provides a lower-wattage LED replacement for approximately 60W incandescent or halogen PAR16 applications while offering dimming, 25,000-hour rated life, and enclosed-fixture suitability. For many retrofit jobs, that helps reduce relamping frequency and energy use without changing the fixture.
Compared with similar products
Compared with wider-beam PAR lamps, this 40° beam gives more controlled directional light. Compared with GU10 PAR16 lamps, this version uses a standard E26 medium base for line-voltage fixtures. As a rule of thumb, 3000K is commonly selected where a warm residential or hospitality appearance is preferred over cooler commercial colour temperatures. Actual lighting results depend on fixture design, mounting height, surface reflectance, and dimmer compatibility.
Specifications
- Product type: LED PAR16 lamp
- Manufacturer part number: S9388
- Brand: Satco Lighting
- Light output: 500 lm
- Wattage: 6.5W
- Incandescent equivalent: approximately 60W
- Colour temperature: 3000K warm white
- CRI: 80+
- Beam angle: 40°
- Voltage: 120V
- Base: E26 medium base
- Dimmable: Yes
- Rated life: 25,000 hours
- Power factor: 0.92
- Operating temperature: -13°F to 113°F (-25°C to 45°C)
- Location rating: Damp
- Enclosed fixture rated: Yes
- Maximum overall length: 2.88 in (73 mm)
- Maximum diameter: 2 in (51 mm)
- Warranty: 5 years
- BrandSatco Lighting
- Warranty5 year
- Lamps
- Replaces60W
- Lumens500
- DimmableDimmable
- Watts6.5W
- Color Temperature3000K
- Volts120V
- CRI83
- ShapePAR16
- Beam Angle40°
- Diameter2.0"
- Overall Length2.88"
- BaseMedium
- Bulb FinishPrismatic Lens
- Rated Life25,000hrs
- Pack Size1
- Case Quantity48
- Energy StarYes
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.