6777 lm LED Hi-Pro Shop Light · 60W 4000K 120V · Plug-In IP65 Round High Bay · Satco Lighting 65-961
What this product is for
This 60W integrated LED Hi-Pro shop light is a round, plug-in utility fixture designed for garages, workshops, service areas, storage rooms, and light industrial spaces that need broad 4000K task lighting from a compact high-bay style form factor.
Use for
Use for suspended lighting in work areas, maintenance bays, utility rooms, sheds, covered outdoor work zones, and similar spaces where a 120V plug-in fixture with a locking snap hook helps speed installation. It is suitable for indoor or outdoor use and carries an IP65 enclosure rating for protection against dust and water ingress.
Avoid for
Avoid using this fixture where dimming is required, where a replaceable lamp is preferred, or where a decorative indoor fixture is needed. It is also not the right choice when a larger linear shop light is needed to spread light over long bench runs.
Best for
Best for electricians and contractors needing a compact round shop light with cord-and-plug convenience, 6777 lumen output, and a rugged die-cast aluminium housing. It fits applications where quick mounting and reliable general illumination matter more than lighting controls.
Installed in
Typically installed in garages, workshops, barns, utility buildings, storage spaces, service counters, and light commercial back-of-house areas. The fixture body is approximately 8.27 in. diameter x 5.63 in. high (210 x 143 mm), with a 6 ft (1.8 m) cord.
Why this product exists
This product exists to provide a simple, compact alternative to larger hardwired shop lights where 120V receptacle power is already available. The integrated LED design reduces lamp replacement, while the 4000K colour temperature is commonly used for neutral white task lighting in work environments.
Compared with similar products
Compared with linear shop lights, this round high-bay style fixture concentrates output from a smaller footprint and is easier to hang in open areas. Compared with higher wattage UFO fixtures, this 60W model is better suited to smaller work zones or lower mounting heights. As a typical lighting rule of thumb, 4000K is commonly selected for workshops and commercial task areas where colour clarity and visibility are important. Actual lighting performance depends on mounting height, spacing, reflectances, and site conditions.
Specifications
- Manufacturer part number: 65-961
- Brand: Satco Lighting / NUVO
- Product type: Hi-Pro shop light with plug
- Light source: Integrated LED
- Lumen output: 6777 lm
- Wattage: 60W
- Voltage: 120V
- Current: 0.500A
- Colour temperature: 4000K
- CRI: 80+
- Beam angle: 110°
- Dimmable: No
- Rated life: 30,000 hours
- Ingress protection: IP65
- Location rating: Wet location
- Housing material: Die-cast aluminium
- Lens material: Polycarbonate
- Finish: Black powder coat
- Diameter: 8.27 in. (210 mm)
- Height: 5.63 in. (143 mm)
- Cord length: 6 ft (1.8 m)
- Mounting: Includes locking snap hook
- Surge protection: Built-in 2 kV
- Operating temperature: -20°C to +45°C (-4°F to +113°F)
- Application: Indoor/outdoor
- Warranty: 3-year limited
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.