White 3 Watt Indoor/Outdoor Vertical Step Light 3K SATCO 65-405
What this product is for
This integrated LED vertical step light is used to provide low-level wayfinding light on stairs, risers, hallways, and exterior walking surfaces. It delivers 200 lumens at 3000K from a compact recessed fixture with a white finish and 120V input.
Use for
Use for indoor stairways, corridor walls, exterior step walls, and pathway transition points where a small wet-rated fixture is required. It is suitable for mounting within 4 ft (1.2 m) of the ground and is commonly selected where a clean vertical light pattern is preferred.
Avoid for
Avoid using this fixture as a primary area light or where higher output is needed for broad coverage. It is intended for guidance and accent lighting rather than general illumination.
Best for
Best for residential and light commercial step-lighting applications that need a compact 120V fixture, warm white colour temperature, and a finished recessed look. Dimming compatibility can help reduce glare in enclosed interior spaces when paired with a compatible control.
Installed in
Typically installed in stair risers, masonry or finished walls, entry transitions, and exterior landscape walls. The fixture body is approximately 5.03 in x 3.07 in x 1.57 in (128 x 78 x 40 mm).
Why this product exists
This product provides safer navigation in low-light areas without the output or footprint of a full wall fixture. A 3000K step light is commonly used where comfortable visual guidance is needed without the harsher appearance of cooler colour temperatures.
Compared with similar products
Compared with larger wall lights, this step light is built for low mounting height and controlled guidance lighting. Compared with lamp-based fixtures, the integrated LED design reduces relamping. As a rule of thumb, step lights like this are used for orientation and spacing rather than wide-area lighting; actual performance depends on mounting height, surface reflectance, spacing, and site conditions.
Specifications
- Manufacturer part number: 65-405
- Brand: Satco Nuvo
- Product type: LED vertical step light
- Light output: 200 lm
- Wattage: 3 W
- Colour temperature: 3000K warm white
- Voltage: 120V
- Current: 0.025A
- CRI: 80
- Finish: White
- Material: Die-cast aluminium with glass lens
- Fixture type: Recessed step light
- Dimming: Forward phase or reverse phase / phase selectable dimming listed on manufacturer spec sheet
- Location rating: Wet location
- Mounting guidance: Suitable for mounting within 4 ft (1.2 m) of the ground
- Rated life: 50,000 hours
- Dimensions: 5.03 in L x 3.07 in W x 1.57 in H (128 x 78 x 40 mm)
- Weight: 0.4 lb (0.18 kg)
- Certifications: cULus, RoHS, FCC compliant
- Warranty: 5 years
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.