407 lm LED horizontal step light · 5W 3000K 120V wet location bronze · integrated LED · Satco Lighting 65-403
What this product is for
This 5W integrated LED horizontal step light is used to provide low-level wayfinding light on stairs, landings, corridors and exterior step areas. It delivers 407 lumens of warm 3000K light from a compact bronze fixture designed for 120V line-voltage installation.
Use for
Use for indoor stair walls, hallway transitions, exterior masonry or siding step locations, deck step areas and walkway wall lighting where a wet location rated fixture is required. Dimming support can help reduce glare in residential and light commercial applications.
Avoid for
Avoid using this fixture as the primary light source for large spaces or open outdoor areas. It is intended for guidance and accent-level illumination rather than area lighting or security flood lighting.
Best for
Best for electricians and contractors specifying a compact 120V step light with warm white output, bronze finish and integrated LED source for consistent appearance across indoor and outdoor step-lighting runs.
Installed in
Typically installed in stair riser walls, side walls along steps, retaining walls, entry transitions and similar finished wall locations. The visible face is approximately 5 in W x 1.63 in D (127 x 41 mm), with overall dimensions approximately 5.13 in W x 3.25 in L x 2.25 in H (130 x 83 x 57 mm).
Why this product exists
This fixture provides safer navigation in low-light areas while using less energy than older incandescent step lights. The integrated LED design reduces relamping, and the warm 3000K colour temperature is commonly used where a softer residential or hospitality look is preferred.
Compared with similar products
Compared with larger wall lights, this step light is intended for close-range guidance lighting with a controlled output of 407 lumens. Compared with replaceable-lamp fixtures, the integrated LED format simplifies maintenance planning but does not use a field-replaceable lamp. As a rule of thumb, step lights are commonly spaced by layout and sightline rather than by exact lumen calculations; actual results depend on mounting height, surface reflectance and site conditions.
Actual performance depends on installation conditions, mounting location, surrounding finishes and local electrical code.
Specifications
- Manufacturer part number: 65-403
- Brand: Satco Lighting / NUVO
- Fixture type: Horizontal step light
- Light source: Integrated LED
- Wattage: 5W
- Voltage: 120V
- Lumen output: 407 lm
- Colour temperature: 3000K
- CRI: 80+
- Dimming: Yes, forward phase or reverse phase
- Finish: Bronze
- Material: Die-cast aluminium
- Lens material: Glass
- Location rating: Wet location
- Safety listing: cULus
- Rated life: 50,000 hours
- Operating temperature: -40°C to 40°C (-40°F to 104°F)
- Approximate overall dimensions: 5.13 in W x 3.25 in L x 2.25 in H (130 x 83 x 57 mm)
- Approximate face dimensions: 5 in W x 1.63 in D (127 x 41 mm)
- Current: 0.042A
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.