200 lm Vertical LED Step Light · 3W 3000K 120V · Bronze Wet Location · Satco Nuvo 65-401
What this product is for
This vertical LED step light is used to add low-level wayfinding light on stairs, landings, corridors, retaining walls, and exterior walkways. It is a direct-wired 120V fixture with an integrated LED light source for residential and light commercial installations.
Use for
Use for indoor stair risers, hallway step lighting, exterior masonry or siding walls, deck access points, and walkway transitions where a compact recessed wall light is needed. The 3000K warm white output is commonly used where a softer appearance is preferred over cooler commercial colour temperatures.
Avoid for
Avoid using this fixture where a replaceable lamp is required, since the LED is integrated. Do not use it in concrete-pour applications, and do not install it without a recessed switch box with at least 13 cu in interior box volume. It is also not intended to light large areas as a primary fixture.
Best for
Best for electricians and contractors specifying a compact bronze step light for wet-location indoor/outdoor use, especially where 120V direct wiring and dimming are required. Typical step lights in this output range are used for guidance and safety lighting rather than general illumination.
Installed in
Installs in a recessed switch box and mounts to the wall. Fixture size is 5.00 in H x 3.00 in W x 1.63 in D (127 x 76 x 41 mm), which helps when working in tight stair and wall locations.
Why this product exists
This product provides code-conscious, low-wattage step and path illumination without using a separate lamp. It gives a finished architectural look in a bronze housing while reducing lamp maintenance compared with older incandescent step lights.
Compared with similar products
Compared with larger wall fixtures, this step light is intended for close-range guidance lighting. Compared with replaceable-lamp fixtures, it has fewer serviceable parts but a simpler integrated LED design. As a rule of thumb, step lights around this lumen range are selected for visibility and orientation, not for broad area coverage. Actual performance depends on mounting height, spacing, surface reflectance, and site conditions.
Specifications
- Manufacturer series: Nuvo
- Manufacturer part number: 65-401
- Product type: Vertical LED step light
- Light output: 200 lm
- Wattage: 3 W
- Voltage: 120V
- Colour temperature: 3000K warm white
- CRI: 80+
- Dimming: Yes, phase-cut; forward phase, reverse phase, or phase selectable dimming noted by manufacturer
- Rated life: 50,000 hours
- Finish: Bronze
- Material: Die-cast aluminium
- Lens material: Glass
- Location rating: Wet location
- Mounting: Wall, direct wired
- Light source: Integrated LED, non-replaceable
- Incandescent equivalent: 25W
- Dimensions: 5.00 in H x 3.00 in W x 1.63 in D (127 x 76 x 41 mm)
- Installation note: Not concrete rated; requires recessed switch box with minimum 13 cu in box volume
- Safety listing: cULus
- Warranty: 5 years
- UPC: 045923554018
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.