- Edmonton Stock: 19
:
from
to
Clear
Clear
S-Hook · Steel · Zinc Plated · For Lightweight Fixture Chain · Hubbell TradeSelect S105
SKU: S105
Steel zinc-plated S-hook for joining lightweight chain in lighting fixture mounting applications. Commonly used where a simple chain connection point is needed for suspended fixtures; verify load, chain size, and support method for the installation.
What this product is for
This S-hook is a lighting accessory used to join lightweight chain in suspended fixture mounting applications. It is typically selected for indoor lighting setups where chain-supported fixtures need a simple steel connection point.
Use for
Use for connecting lightweight fixture chain, making chain-to-chain joins, or attaching chain-supported luminaires where the fixture support method permits an S-hook connection. Suitable for electricians and maintenance teams replacing or matching existing chain-mount hardware.
Avoid for
Avoid using this item where a listed closed connector, threaded fastener, or heavier-duty support fitting is required. Do not use it as a substitute for engineered structural support, and do not assume suitability for heavy fixtures without confirming the fixture weight, chain size, and code-compliant support method.
Best for
Best for straightforward suspended lighting repairs, fixture retrofits, and replacement chain hardware where a zinc-plated steel S-hook matches the existing mounting arrangement.
Installed in
Typically installed in indoor commercial, institutional, utility, and light industrial lighting applications using chain-hung fixtures. It may also be used in other lightweight chain-joining applications where the trade size matches the installation hardware.
Why this product exists
This product provides a simple, low-cost way to join lightweight chain in fixture mounting assemblies. Compared with improvised hooks or mismatched hardware, a catalogued S-hook helps maintain consistency when replacing common chain-mount components.
Compared with similar products
Compared with closed links or threaded connectors, an open S-hook is faster to install and replace, but it is generally chosen for lighter-duty chain connections. Typical trade practice is to confirm the fixture support path and use only hardware appropriate for the fixture weight and local code requirements.
Guidance only: actual performance depends on fixture weight, chain type, support structure, and installation conditions.
Specifications
- Product type: S-hook
- Manufacturer part number: S105
- Brand: Hubbell TradeSelect
- Material: Steel
- Finish: Zinc plated
- Application: Use to join lightweight chain
- Trade size: #105 EMT, #100 rigid
- Certification: CSA Certified
- Typical use category: Fixture chain and mounting accessory
- Package Qty100
- BrandWhite Label
- Warranty5 year
- Lighting Accessories
- Accessory TypeS Hook
- FinishZinc Plated Steel
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Lion Chain · #3 Trade Size · Zinc-Plated Steel, 90 lb Load Limit, 100 ft Roll · NESCO LC3-100
LC3-100
Available to Order | Typically Arrives in 1 - 3 Weeks- Edmonton Stock: 2500
- Edmonton Stock: 10
- Edmonton Stock: 261
NMD Plastic Connector · 1/2 in · 2-Way · Grey · Kora SPC50 300PC JAR
SPC50 300PC JAR
Available to Order | Typically Arrives in 1 - 3 Weeks48 – Loyalty Rewards
