- Edmonton Stock: 775
:
from
to
Clear
Clear
Keyless Pull-Chain Lampholder · Medium Base E26 · 600W 250V · White Plastic · Hubbell Wiring Device-Kellems RL8512
SKU: RL8512
Medium-base E26 pull-chain lampholder rated 600W, 250V with 2 terminal screws and white plastic body. Commonly used for utility rooms, basements and unfinished spaces where a simple switched lampholder is needed.
Delivered to you by Jul 24 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This keyless pull-chain lampholder is a surface-mount lamp socket for general utility lighting where a simple on/off pull chain is preferred at the fixture. It uses a medium base E26 lamp and is rated 600W at 250V.
Use for
Use for basements, utility rooms, storage areas, closets, workshops and other service spaces where a basic lampholder is suitable. It is commonly selected when the switch needs to be at the fixture instead of at the wall.
Avoid for
Avoid for enclosed luminaires, damp or wet locations unless installed in a suitable rated assembly, or applications requiring a decorative fixture, integrated LED luminaire or occupancy control.
Best for
Best for straightforward replacement work and cost-conscious service installs where electricians need a standard medium-base pull-chain lampholder with screw-terminal wiring.
Installed in
Typically installed on a ceiling or wall box in residential or light commercial service spaces. Commonly paired with standard medium-base lamps used on 120V branch circuits, provided the lamp and installation remain within the device rating.
Why this product exists
This product provides a simple switched lampholder without requiring a separate wall switch. For many utility-lighting applications, that reduces material and labour compared with installing a full luminaire and switch leg.
Compared with similar products
Compared with porcelain lampholders, this white plastic model is a lighter-duty general-purpose option. Compared with keyless lampholders without a chain, it adds local switching at the fixture. As a typical trade rule of thumb, pull-chain lampholders are commonly used in unfinished or service spaces rather than finished rooms. Actual suitability depends on fixture location, lamp type and local electrical code.
Specifications
- Manufacturer part number: RL8512
- Brand: Hubbell Wiring Device-Kellems
- Product type: Keyless pull-chain lampholder
- Lamp base: Medium base E26
- Voltage rating: 250V AC
- Wattage rating: 600W
- Terminals: 2 terminal screws
- Material: Plastic body
- Colour: White
- Mounting/application: General surface-mount lampholder for utility lighting
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 50
- Edmonton Stock: 213
Circuit Breaker 1-Pole 15A 120/240V Plug-In Thermal-Magnetic Q-Line | ABB THQL1115
THQL1115
Available to Order | Typically Arrives in 1 - 3 Weeks10 – Loyalty Rewards
Decorator Duplex Receptacle · 15A 125V 5-15R · Tamper Resistant Self-Grounding White · Hubbell RRD15SWTR
RRD15SWTR
Available to Order | Typically Arrives in 1 - 2 Weeks From Ontario Factory Warehouse1 – Loyalty Rewards
