- Edmonton Stock: 8
:
from
to
Clear
Clear
ENT to EMT Transition Coupling · 1/2 in · PVC Set-Screw Adapter · Royal RKTC10
SKU: RKTC10
1/2 in PVC transition coupling for connecting ENT (Corline) to EMT in raceway systems. Commonly used where flexible nonmetallic tubing transitions to EMT; verify compatibility with the conduit system and local electrical code.
What this product is for
The Royal RKTC10 is a 1/2 in ENT-to-EMT transition coupling used to connect electrical nonmetallic tubing (ENT/Corline) to EMT. It is a PVC fitting intended for raceway transitions where a nonmetallic flexible run meets metallic tubing.
Use for
Use for 1/2 in trade size ENT to 1/2 in EMT transitions in commercial, institutional, and residential electrical installations where the specified raceway system permits this fitting. Suitable where a lightweight nonmetallic run needs to terminate into EMT using a set-screw style transition.
Avoid for
Avoid using this fitting as a substitute for a straight coupling within the same raceway type, or where a different connector style, sealing requirement, or code-listed fitting is required. Do not assume suitability for wet, direct-burial, or concrete-tight applications unless the full system listing and installation method confirm it.
Best for
Best for electricians needing a simple transition from Corline/ENT to EMT at 1/2 in trade size, especially on branch circuit runs, wall cavities, or prefabricated raceway layouts where mixed raceway types are specified.
Installed in
Typically installed in walls, ceilings, service spaces, and other raceway pathways using 1/2 in conduit systems. 1/2 in trade size is approximately 16 mm nominal size.
Why this product exists
This fitting exists to provide a listed transition point between ENT and EMT without changing raceway size. It helps maintain a clean conduit path when a project uses flexible nonmetallic tubing in one section and EMT in another.
Compared with similar products
Compared with a standard ENT coupling, this product is specifically for transitioning to EMT rather than joining two ENT sections. Compared with larger trade sizes, the 1/2 in version is commonly selected for smaller branch circuit runs. As typical conduit planning guidance, conduit fill and conductor count still need to be checked for the full raceway system; actual capacity depends on conductor type, insulation, and local code.
Specifications
- Manufacturer part number: RKTC10
- Brand: Royal
- Manufacturer: Westlake Pipe & Fittings / Royal Electrical Solutions
- Product type: ENT to EMT transition coupling / adapter
- Trade size: 1/2 in (approximately 16 mm)
- Material: PVC
- Connection style: Set screw transition
- Colour: Grey
- Application: Transition from ENT (Corline) to EMT
- Approvals: CSA/UL listed per distributor and manufacturer catalogue references
- Country of origin: Canada / Made in Canada references found on source listings
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
ENT conduit coil · 1/2 in x 370 ft · PVC flexible corrugated raceway · Westlake Pipe & Fittings EC005370
EC005370
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC FactoryENT Conduit Reel · 1/2 in Trade Size · 2000 ft Coil · PVC Flexible Raceway · Westlake Pipe & Fittings ENT1/2CORLINEER0052000
ER0052000
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty RewardsENT slab box · 4 x 1/2 in, 2 x 3/4 in, 2 x 1 in hubs · Quick Snap PVC hubbed style · Royal RSMB-H-10-15-20
RSMB-H-10-15
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory17 – Loyalty Rewards
