- Edmonton Stock: 20
:
from
to
Clear
Clear
45° Angled ENT Form Stubby · 1-1/4 in · For Corline/ENT slab stub-downs · Royal RKASTB-25
SKU: RKASTB25
1-1/4 in 45° angled ENT form stubby for Corline/ENT concrete form work. Used to create low-profile slab stub-downs without drilling through wood forms; typical angled stubby designs also help maintain a smoother wire-pull radius during rough-in.
What this product is for
This 1-1/4 in angled ENT form stubby is used with Corline/ENT raceway in concrete slab form work. It creates a 45° stub-down entry point at the form so electricians can bring ENT into the slab while keeping a lower profile during the pour.
Use for
Use for slab-on-grade and formed concrete installations where 1-1/4 in ENT needs to transition through the form at an angle. Commonly used when you want to avoid drilling holes through plywood forms and when a smoother bend path is preferred for pulling conductors after the pour.
Avoid for
Avoid using this fitting where a straight stub-up or different raceway system is required, or where the installation is not designed for Corline/ENT fittings. Do not assume compatibility with non-matching raceway systems without confirming manufacturer fit.
Best for
Best for concrete form work requiring a 45° angled entry, especially where form removal, raceway protection, and easier conductor pull-through are important. Also suitable when maintaining a lower profile in the slab pour helps reduce interference with reinforcing or form layout.
Installed in
Typically installed in wood concrete forms for residential, multi-unit, and light commercial slab construction using ENT raceway. Common applications include floor box feeds, island receptacle runs, and branch circuit rough-in pathways cast into concrete.
Why this product exists
This fitting exists to simplify slab rough-in with ENT by forming a controlled angled stub-down at the form edge. Typical manufacturer-style angled stubby designs help reduce field improvisation, protect the raceway during form removal, and improve the bend path compared with forcing a tighter transition at the form.
Compared with similar products
Compared with a straight form stubby, this 45° angled version is typically chosen when wire-pull path and lower-profile slab entry matter more than a direct vertical transition. Compared with field-made solutions, a purpose-built ENT stubby offers more consistent fit with the raceway system. Actual installation suitability depends on form layout, slab design, and local electrical code.
Specifications
- Product type: 45° angled ENT form stubby
- Trade size: 1-1/4 in (approximately 32 mm)
- System compatibility: Corline / ENT raceway
- Application: Concrete form slab stub-downs
- Material family: Polyethylene ENT fitting
- Colour: Black
- Manufacturer part number: RKASTB-25
- Typical carton quantity from manufacturer literature: 50
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
ENT form stubby · 1-1/4 in (32 mm) · for Corline/ENT bends and slab stub-ups · Royal RECM25
RECM25
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory2 – Loyalty Rewards
