- Edmonton Stock: 5
PVC Female Adapter · 2-1/2 in · Female Thread x Solvent Weld · Royal RFA40
What this product is for
This 2-1/2 in PVC female adapter is used to connect rigid PVC conduit to a female threaded transition point or to adapt between solvent-weld PVC conduit and threaded components in electrical raceway systems. It is intended for non-metallic conduit installations where corrosion resistance and a secure threaded connection are required.
Use for
Use for rigid PVC conduit runs entering boxes, enclosures, fittings, or other threaded terminations. It is commonly selected where a 2-1/2 in trade size conduit needs a solvent-weld connection on one side and a female tapered thread on the other.
Avoid for
Avoid using this fitting where a male adapter, terminal adapter, or reducing fitting is required instead. Do not use it outside its listed conduit system or where thread compatibility and conduit size have not been confirmed.
Best for
Best for commercial, industrial, and service raceway installations using rigid PVC conduit in damp, corrosive, or below-grade environments where non-metallic fittings are preferred.
Installed in
Typically installed in electrical rooms, service entrances, utility areas, industrial facilities, and outdoor conduit systems. For size reference, 2-1/2 in trade size is approximately 63.5 mm.
Why this product exists
This fitting provides a practical transition between solvent-weld PVC conduit and female threaded connections while maintaining the corrosion-resistant benefits of PVC conduit systems. It helps electricians complete threaded entries without changing raceway material.
Compared with similar products
Compared with a terminal adapter, this female adapter is chosen when a female threaded connection is needed rather than a box-entry style fitting. Compared with metallic fittings, PVC is commonly used where moisture or corrosive conditions are a concern.
Specifications
- Product type: PVC female adapter
- Trade size: 2-1/2 in (63.5 mm)
- Part number: RFA40
- Brand: Royal / Westlake Pipe & Fittings
- Material: PVC
- Colour: Grey
- Connection 1: Female tapered thread
- Connection 2: Solvent-weld socket
- For use with: Rigid PVC conduit
- Typical application: Transition from PVC conduit to threaded fitting or enclosure entry
- Approvals: CSA/UL approved listing indicated by distributor sources
- Approximate inside diameter listed by distributor: 2.47 in (62.7 mm)
Typical buying guidance: electricians commonly choose this style when they need a threaded PVC transition without introducing metal fittings into a corrosive environment. Actual fit and performance depend on conduit system compatibility, installation method, and local electrical code.
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- 22 – Loyalty Rewards
- Edmonton Stock: 4
PVC Type LB Access Fitting · 2 in Rigid PVC · CSA/UL Approved · Royal RSLB60S
RSLB60S
20 – Loyalty RewardsCable Tie · 7.3 in (186 mm) · Black UV-Resistant · 50 lb · 100-Pack · Vista 46090
49060
Available to Order | Typically Arrives in 1 - 3 Weeks Ships From Ontario Importer Warehouse8 – Loyalty Rewards- Edmonton Stock: 8
PVC Male Terminal Adapter · 2-1/2 in Trade Size · Grey Rigid PVC · Royal RTA40
RTA40
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory7 – Loyalty Rewards










