PVC Junction Box · 12 x 12 x 4 in · Gasketed NEMA 4X Enclosure · Westlake Pipe & Fittings RJB12124
PVCJB12124
109
– Loyalty Rewards
PVC Female Adapter · 1 in Trade Size · Female Tapered Thread x Solvent Weld · Westlake Pipe & Fittings RFA20
Rigid PVC female adapter for 1 in trade size conduit, with a female tapered threaded end and solvent-weld socket for transitioning between threaded fittings and PVC conduit. Commonly used in service entrance and box-entry work where a corrosion-resistant, non-metallic connection is required.
What this product is for
The Westlake Pipe & Fittings RFA20 is a rigid PVC female adapter used to connect 1 in trade size PVC conduit to a male threaded fitting or conduit component. It provides a solvent-weld socket on one end and a female tapered threaded connection on the other for a secure transition in non-metallic raceway systems.
Use for
Use for PVC conduit runs entering boxes, enclosures, or threaded fittings where a 1 in female threaded connection is needed. Suitable for indoor or outdoor electrical conduit installations where corrosion resistance and non-conductive material are preferred.
Avoid for
Avoid using this fitting where a male terminal adapter is required, or where the mating thread type and trade size do not match. Do not treat trade size as exact inside diameter when planning conduit fill or fitting compatibility.
Best for
Best for electricians and contractors installing rigid PVC conduit in commercial, industrial, utility, and residential applications that need a threaded transition without using metallic fittings in corrosive environments.
Installed in
Typically installed in PVC conduit systems for service entrances, junction boxes, pull boxes, and equipment connections. Commonly selected where moisture, soil contact, or corrosive conditions make PVC conduit a practical choice.
Why this product exists
This adapter exists to bridge solvent-weld PVC conduit and threaded connection points in the same raceway system. Compared with improvised transitions, it gives a purpose-built fitting with matching 1 in trade size geometry and tapered female threads for a tighter connection.
Compared with similar products
Choose a female adapter when the mating component has male threads. If the installation needs the opposite configuration, a terminal adapter or male adapter is typically the correct choice. As a rule of thumb, confirm both thread gender and trade size before ordering to avoid field rework.
Actual fit and performance depend on the mating component, installation method, and local electrical code.
Specifications
- Manufacturer part number: RFA20
- Brand: Westlake Pipe & Fittings
- Product type: Rigid PVC conduit female adapter
- Trade size: 1 in
- Connection type: Female tapered thread x solvent-weld socket
- Material: PVC
- Colour: Gray
- Suitable for: PVC rigid conduit
- Approvals: CSA/UL approved
- Nominal inside diameter: 1.065 in (approximately 27 mm)
- Overall length: 2.3 in (approximately 58 mm)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC FactoryPVC Type LB Access Fitting · 1 in Trade Size · CSA/UL Listed · Westlake Pipe & Fittings RSLB30S
RSLB30S
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory6 – Loyalty Rewards- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty Rewards- Edmonton Stock: 21
- Edmonton Stock: 2
Duct Seal Compound · 1 lb Block · Gray Non-Hardening Putty · Topaz 961
961
Available to Order | Typically Arrives in 1 - 3 Weeks6 – Loyalty Rewards
