- Edmonton Stock: 16
:
from
to
Clear
Clear
PVC Conduit 90° Bell-End Elbow · 1-1/2 in Trade Size · Rigid PVC · Royal REE3090
SKU: REE3090
Rigid PVC 90° bell-end elbow for 1-1/2 in electrical conduit runs, used to change direction in raceway installations. Commonly selected where a factory elbow helps maintain a consistent bend radius and simplifies solvent-weld assembly.
What this product is for
This 1-1/2 in trade size rigid PVC 90° bell-end elbow is used in electrical conduit systems to change direction while maintaining a factory-formed bend. It is intended for solvent-weld PVC conduit installations in commercial, industrial, utility, and outdoor raceway work.
Use for
Use for 90-degree changes in direction in rigid PVC conduit runs, including above-ground and buried raceway layouts where compatible electrical PVC conduit and fittings are specified. The bell end helps speed joining on one side of the elbow during installation.
Avoid for
Avoid using this fitting with non-compatible conduit systems, plumbing applications, or where a different bend angle, sweep, or conduit material is required. Do not assume suitability for every environment without confirming local code, conductor fill, and installation requirements.
Best for
Best for electricians and contractors who want a factory elbow for a cleaner 90° turn than field-bending conduit on site. It is also a practical choice where consistent bend radius matters for pulling conductors through larger trade sizes.
Installed in
Typically installed in electrical raceway systems in walls, slabs, service entrances, utility runs, and underground conduit layouts. For a 1-1/2 in fitting, the published bend radius is 8-1/4 in (approximately 210 mm), which can help with layout planning and conductor pulling.
Why this product exists
This fitting provides a ready-made 90° change of direction in rigid PVC conduit systems, reducing field labour and helping keep bends consistent from one installation to the next. As a rule of thumb, factory elbows are commonly used where repeatable bends and easier wire pulls are preferred. Actual pulling performance depends on conductor type, fill, layout, and local electrical code.
Compared with similar products
Compared with plain-end elbows, a bell-end elbow provides an integrated belled socket on one end for solvent-weld joining. Compared with field-bent conduit, a factory elbow offers a fixed radius and angle, which is commonly preferred for predictable routing and repeatable installation results.
Specifications
- Manufacturer part number: REE3090
- Brand: Royal
- Manufacturer: Westlake / Royal Pipe Systems
- Product type: Rigid PVC conduit elbow
- Angle: 90°
- End style: Bell end
- Trade size: 1-1/2 in
- Material: PVC
- Published bend radius: 8-1/4 in (approximately 210 mm)
- Published socket / insertion length: 2 in (approximately 51 mm)
- Average inside diameter reference: 1.900 in (approximately 48 mm)
- Application: Electrical conduit raceway systems
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty Rewards- Edmonton Stock: 5
- Edmonton Stock: 1
- Edmonton Stock: 9
- Edmonton Stock: 5
PVC 90° Elbow · 2 in Trade Size · Bell End · Westlake Pipe & Fittings REE3590
REE3590
11 – Loyalty Rewards- Edmonton Stock: 50
