- Edmonton Stock: 20
:
from
to
Clear
Clear
PVC Conduit Elbow · 1 in 90° Bell End · Rigid PVC · Westlake Pipe & Fittings REE2090
SKU: REE2090
1 in rigid PVC 90° bell-end conduit elbow for electrical raceway runs. Commonly used to change direction in above-ground or underground PVC conduit systems where a factory bend helps maintain consistent radius and fit.
What this product is for
This 1 in 90° rigid PVC conduit elbow is used to change direction in non-metallic electrical raceway systems. It is a bell-end style fitting intended to join with compatible rigid PVC conduit using solvent-weld installation methods specified for the system.
Use for
Use for electrical conduit runs that need a clean 90° change in direction, including service entrances, stub-ups, wall penetrations, and underground-to-above-ground transitions where rigid PVC conduit is specified.
Avoid for
Avoid using this fitting with metallic conduit systems, pressure piping, or applications requiring a different bend angle or end configuration. Do not substitute it where local code, conduit type, or fitting approval does not match the installation.
Best for
Best for electricians and contractors who want a factory-formed bend instead of field-bending conduit. A factory elbow can help keep the raceway layout consistent and may simplify pull paths compared with improvised bends, depending on conductor count and installation layout.
Installed in
Typically installed in commercial, industrial, utility, and residential electrical raceway systems using rigid PVC conduit. Suitable for locations where non-metallic conduit is commonly specified, subject to local code and approved installation practice.
Why this product exists
This fitting provides a ready-made 90° change of direction with a bell end for joining conduit, helping maintain a consistent bend radius and fit. For 1 in trade size, published dimensions indicate an approximate bend radius of 5-3/4 in (146 mm) and an overall socket length of about 1.875 in (48 mm).
Compared with similar products
Compared with straight couplings, this elbow changes direction while keeping the run within a rigid PVC system. Compared with field-bent conduit, a factory elbow offers a known geometry and is commonly chosen where repeatability matters. Actual pull performance depends on conductor size, fill, layout, and local electrical code.
Specifications
- Product type: Rigid PVC conduit elbow
- Trade size: 1 in
- Metric equivalent: approximately 27 mm trade size reference
- Angle: 90°
- End style: Bell end
- Material: PVC
- Colour: Grey
- System type: Rigid non-metallic conduit
- Published bend radius: 5-3/4 in (146 mm)
- Published diameter: 1.315 in (33 mm)
- Published socket length: 1.875 in (48 mm)
- Approvals: CSA/UL listed or approved per distributor/manufacturer listings
- Manufacturer part number: REE2090
- Brand: Westlake Pipe & Fittings
- Pack quantity: commonly listed as 25 per carton
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
PVC Type LB Access Fitting · 1 in Trade Size · CSA/UL Listed · Westlake Pipe & Fittings RSLB30S
RSLB30S
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory6 – Loyalty Rewards- Edmonton Stock: 17
PVC 90° Elbow · 2 in Trade Size · Bell End · Westlake Pipe & Fittings REE3590
REE3590
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory11 – Loyalty Rewards
