- Edmonton Stock: 30
PVC conduit elbow · 3/4 in 90° bell end · rigid non-metallic conduit fitting · Royal REE1590
3/4 in PVC 90° bell-end elbow for rigid non-metallic electrical conduit runs. Commonly used to change direction in PVC raceway systems while maintaining a solvent-weld connection; verify conduit type, bend radius, and code requirements for the installation.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 3/4 in PVC 90° bell-end elbow is used to change direction in rigid non-metallic electrical conduit systems. It is intended for solvent-weld PVC conduit installations where a factory elbow is preferred over field bending.
Use for
Use for 90° changes in direction on 3/4 in PVC conduit runs in residential, commercial, and light industrial electrical raceway systems. Suitable where a bell-end rigid PVC elbow is specified and where non-metallic conduit is being installed in accordance with applicable code.
Avoid for
Avoid using this fitting with EMT, rigid metal conduit, or non-matching conduit systems. Do not use where a different sweep radius, fitting style, or conduit type is required by the layout or local electrical code.
Best for
Best for electricians and contractors installing 3/4 in PVC conduit where a clean 90° turn is needed with a consistent factory bend. A factory elbow can help save installation time compared with assembling directional changes from straight fittings.
Installed in
Typically installed in exposed or concealed PVC conduit systems, including service entrances, underground raceways, and general branch circuit routing where rigid non-metallic conduit is permitted. Actual application depends on the full raceway design and local code requirements.
Why this product exists
This fitting provides a ready-made 90° change of direction for PVC conduit systems, helping maintain alignment and solvent-weld compatibility. It is commonly selected when installers want a standard bell-end elbow matched to 3/4 in conduit.
Compared with similar products
Compared with straight couplings or field-made directional changes, this elbow provides a fixed 90° turn. Compared with larger-radius sweeps, it is typically chosen where the specified bend radius and available space suit a standard elbow. Always confirm the required bend style for conductor pulling and layout conditions.
Specifications
- Product type: PVC conduit elbow
- Trade size: 3/4 in
- Metric equivalent: approximately 21 mm trade size
- Angle: 90°
- End style: Bell end
- Material: PVC
- Colour: Grey
- Bend radius: 4-1/2 in (114 mm)
- Outside diameter: 1.05 in (26.7 mm)
- Application: Rigid non-metallic electrical conduit systems
- Standards: CSA/UL approved listing indicated by distributor/manufacturer sources
- Manufacturer part number: REE1590
- Brand: Royal
Typical buying note: for 3/4 in PVC conduit runs, confirm the elbow radius and conduit fill plan before pulling conductors, especially where multiple bends are present. Actual installation suitability depends on conductor type, pull length, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 20
- Edmonton Stock: 20
PVC Junction Box · 12 x 12 x 4 in · Gasketed NEMA 4X Enclosure · Westlake Pipe & Fittings RJB12124
PVCJB12124
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory109 – Loyalty Rewards- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty Rewards- Edmonton Stock: 100
- Edmonton Stock: 3
