45° Angled ENT Form Stubby · 1-1/4 in · For Corline/ENT slab stub-downs · Royal RKASTB-25
RKASTB25
3
– Loyalty Rewards
:
from
to
Clear
Clear
ENT form stubby · 1-1/4 in (32 mm) · for Corline/ENT bends and slab stub-ups · Royal RECM25
SKU: RECM25
1-1/4 in (32 mm) polyethylene ENT form stubby for Corline/ENT installations. Commonly used to form a stub-up or bend transition in concrete slab and rough-in work; verify fit and installation method with the matching ENT system and local code requirements.
What this product is for
The RECM25 is a 1-1/4 in (32 mm) straight stubby fitting for Corline/ENT raceway systems. It is used where electricians need to form a protected stub-up or transition point for ENT emerging from slab or concealed raceway runs.
Use for
Use for 1-1/4 in ENT/Corline rough-in work, slab pours, and raceway terminations where a formed stub-up is required. This size is typically selected when larger cable bundles or conductors need more raceway capacity than smaller ENT sizes.
Avoid for
Avoid using this product with rigid PVC conduit systems, EMT, or metallic raceways unless the system design specifically allows it. Do not assume interchangeability across conduit families; confirm compatibility with the intended Corline/ENT components before ordering.
Best for
Best for concrete slab rough-ins, wall stub-outs, and commercial or institutional ENT layouts where a formed polyethylene stubby is preferred for the matching non-metallic raceway system.
Installed in
Typically installed in slab-on-grade construction, walls, and concealed raceway pathways in residential, commercial, and light industrial projects using ENT/Corline systems.
Why this product exists
This fitting helps create a clean transition point in ENT runs and supports faster rough-in planning for slab and formed raceway layouts. As a rule of thumb, larger trade sizes such as 1-1/4 in (32 mm) are commonly chosen where future cable pulling space is a consideration, but actual conduit fill depends on conductor type, insulation, and local electrical code.
Compared with similar products
Compared with smaller ENT form stubbies, the 1-1/4 in (32 mm) size provides more raceway capacity for larger pulls. Compared with angled form stubbies, this straight stubby is intended where a straight formed transition is preferred rather than a 45° change in direction.
Specifications
- Manufacturer part number: RECM25
- Brand: Royal / Westlake Pipe & Fittings
- Product type: Straight stubby
- Trade size: 1-1/4 in (32 mm)
- Material: Polyethylene
- System compatibility: Corline / ENT
- Colour: Black
- Typical package quantity: 200
Typical guidance only: actual performance and suitability depend on installation conditions, conductor fill, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory