- Edmonton Stock: 2
:
from
to
Clear
Clear
ENT Form Stubby · 3/4 in · For Corline/Royal Flex ENT · Royal RECM15
SKU: RECM15
3/4 in ENT form stubby for Royal Flex/Corline electrical non-metallic tubing systems. Used to terminate or stub up ENT in concrete-tight raceway installations; verify compatibility with the tubing system and fitting layout before ordering.
What this product is for
The Royal RECM15 is a 3/4 in ENT form stubby used with Royal Flex/Corline electrical non-metallic tubing systems. It is intended for raceway terminations and stub-up transitions in PVC ENT installations where a formed end piece is required.
Use for
Use for 3/4 in ENT runs in concrete slabs, walls, and other electrical raceway layouts that use Royal Flex or compatible Corline-style ENT fittings. Commonly selected for commercial buildings, institutional projects, industrial work, residential high-rises, and parking structures where ENT is specified.
Avoid for
Avoid using this part with the wrong conduit size or with unrelated rigid conduit systems unless the manufacturer-approved fitting system allows it. Do not assume cross-brand fit without confirming the ENT system requirements and local code acceptance.
Best for
Best for electricians and contractors standardizing on Royal Flex/Corline ENT systems and needing a 3/4 in formed stubby for consistent rough-in work. It is a practical choice where lightweight non-metallic raceway components are being installed in concrete-tight applications.
Installed in
Typically installed in encased concrete, slab work, fire-rated interior wall assemblies, and other approved ENT raceway applications. Actual installation suitability depends on the complete raceway design, site conditions, and local electrical code.
Why this product exists
This fitting provides a formed termination point for 3/4 in ENT, helping contractors complete stub-up and transition details within a matched non-metallic tubing system. Using the correct system fitting can simplify layout, maintain fit, and support code-compliant raceway assembly.
Compared with similar products
Compared with standard couplings or locknuts, a form stubby is used where a shaped stub-up or formed end detail is needed rather than a straight joining connection. For buyers comparing options, the key decision points are conduit size, ENT system compatibility, and whether the installation calls for a straight stubby or an angled form stubby.
Specifications
- Manufacturer part number: RECM15
- Brand: Royal
- Series: Royal Flex
- Product type: ENT form stubby
- Trade size: 3/4 in (19 mm)
- Material: PVC / polyethylene-listed distributor references vary by source
- For use with: Electrical non-metallic tubing (ENT), Corline/Royal Flex systems
- Colour: Grey, where listed
- Standards: CSA C22.2 No. 227.1; UL 1653 referenced at distributor level for the ENT system
- Typical carton quantity: 150
Buying note: confirm the exact fitting geometry required for the rough-in. Similar part families may include straight stubbies, angled form stubbies, plugs, couplings, and locknuts, so matching the fitting style to the installation detail is important.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
ENT Coupling · 3/4 in PVC · For Corline / ENT · Royal RKC15
RKC15
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory2 – Loyalty Rewards- Edmonton Stock: 480
ENT Conduit · 3/4 in Reel 1500 ft · Corrugated PVC, Grey · Royal ENR075
ER0071500
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty RewardsENT slab box · 4 x 1/2 in, 2 x 3/4 in, 2 x 1 in hubs · Quick Snap PVC hubbed style · Royal RSMB-H-10-15-20
RSMB-H-10-15
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory17 – Loyalty Rewards
