- Edmonton Stock: 12
:
from
to
Clear
Clear
NMD90 Copper Building Cable · 14 AWG 2-Conductor with Ground · 150 m Coil · Various Mfg. NMD2C14150
SKU: NMD2C14150
14 AWG 2-conductor NMD90 copper building cable with bare ground in a 150 m (492 ft) coil for residential branch circuit wiring in dry or damp locations where permitted by code. Commonly used on 15A circuits for receptacles, switches and lighting; actual circuit design and code compliance depend on installation conditions and local electrical code.
Minimum purchase quantity:150 units
What this product is for
This NMD90 copper building cable is used for residential branch circuit wiring in dry locations and concealed dry or damp locations where permitted by code. It is a 14 AWG, 2-conductor cable with a bare bonding wire supplied in a 150 m (approximately 492 ft) coil.
Use for
Use for typical 120V residential circuits such as lighting, switches, receptacles and other general wiring runs where 14 AWG copper NMD90 is specified. As a rule of thumb, 14 AWG copper is commonly used on 15A circuits.
Avoid for
Avoid using this cable in wet locations, direct burial, exposed outdoor runs, or where armoured or conduit wiring methods are required. Do not use it on 20A branch circuits that require 12 AWG conductors.
Best for
Best for electricians and contractors wiring houses, suites, renovations and residential additions that need a full 150 m coil of standard 14/2 NMD90 copper cable with ground.
Installed in
Typically installed in wood-frame residential construction, finished basements, renovations, and other indoor branch circuit applications in Canada. Common installation points include walls, ceilings, joist spaces and concealed cavities.
Why this product exists
This cable provides a standard Canadian residential wiring method for 15A branch circuits using copper conductors with 90°C insulation and a 300V rating. The 150 m coil suits longer runs and multi-room rough-in work while reducing the number of coil changes on site.
Compared with similar products
Compared with 12 AWG NMD90, this 14 AWG cable is typically chosen for 15A circuits rather than 20A circuits. Compared with shorter 75 m coils, the 150 m coil is commonly selected for larger rough-ins or when fewer pull changes are preferred. Actual conductor selection depends on load, voltage drop, installation method, insulation, layout, and local electrical code.
Specifications
- Cable type: NMD90 building cable
- Conductor size: 14 AWG
- Conductors: 2 insulated copper conductors with bare ground
- Conductor material: Copper
- Length: 150 m (approximately 492 ft)
- Voltage rating: 300V
- Maximum conductor temperature: 90°C (194°F)
- Installation temperature: minimum recommended -25°C (-13°F) for 2-conductor cable with suitable handling procedures
- Locations: Exposed work in dry locations or concealed work in dry or damp locations where permitted
- Jacket: PVC overall jacket with insulated conductors and nylon jacket per listed product details
- Colour: White
- Certification: CSA Certified
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 12
- Edmonton Stock: 2500
- Edmonton Stock: 1
- Edmonton Stock: 300
- 1% off trade
- Edmonton Stock: 329
NMD Plastic Connector · 1/2 in · 2-Way · Grey · Kora SPC50 300PC JAR
SPC50 300PC JAR
Available to Order | Typically Arrives in 1 - 3 Weeks48 – Loyalty Rewards
