- Edmonton Stock: 12
:
from
to
Clear
Clear
NMD90 Copper Building Cable · 12 AWG 2-Conductor with Ground · 150 m Yellow Jacket · Various Mfg. NMD2C12150
SKU: NMD2C12150
12 AWG 2-conductor copper NMD90 cable with ground on a 150 m yellow spool for dry-location residential branch circuit wiring. Commonly used on 20A circuits with #12 copper, subject to Canadian Electrical Code requirements and installation conditions.
Minimum purchase quantity:150 units
Delivered to you by Sep 10 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This Various Mfg. NMD90 copper building cable is used for residential and light commercial branch circuit wiring in dry locations. It is a 12 AWG, 2-conductor cable with bonding wire on a 150 m (approximately 492 ft) spool with a yellow outer jacket.
Use for
Use for concealed or exposed dry-location wiring where NMD90 cable is permitted by code, including receptacle circuits, general wiring runs, and other indoor branch circuit applications that call for 12 AWG copper conductors.
Avoid for
Avoid using NMD90 in wet locations, direct burial applications, or anywhere armoured, sunlight-resistant, or conduit-rated cable is specifically required. Always confirm suitability with the Canadian Electrical Code and local inspection authority.
Best for
Best for electricians and contractors wiring indoor 120/240 V residential circuits where a full 150 m spool helps reduce joints and supports longer rough-in runs. A typical trade rule of thumb is that #12 AWG copper is commonly used on 20A circuits, but actual circuit design depends on load, breaker sizing, derating, and code.
Installed in
Typically installed in houses, apartments, condos, and similar wood-frame construction in walls, floors, and ceilings in dry interior spaces.
Why this product exists
NMD90 gives contractors a code-recognized non-metallic sheathed cable option for indoor dry-location wiring. Various Mfg.'s SIMpull jacket design is marketed to pull more easily and strip more cleanly than conventional non-metallic cable jackets.
Compared with similar products
Compared with 14 AWG NMD90, this 12 AWG cable is typically selected where a 20A branch circuit is required instead of 15A. Compared with armoured cable, NMD90 is commonly chosen for indoor dry framed construction where mechanical protection requirements are lower and non-metallic cable is permitted.
Guidance only: actual performance depends on installation conditions, bundling, ambient temperature, insulation contact, layout, and local electrical code.
Specifications
- Brand: Various Mfg.
- Manufacturer part number: NMD2C12150
- Cable type: NMD90 copper building cable
- Conductor size: 12 AWG
- Conductors: 2 insulated conductors with ground/bonding wire
- Conductor material: Copper
- Voltage rating: 300 V
- Maximum conductor temperature: 90°C
- Jacket colour: Yellow
- Length: 150 m (approximately 492 ft)
- Application: Dry-location residential and indoor branch circuit wiring
- Standard: CSA C22.2 No. 48
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 12
- Edmonton Stock: 2500
- Edmonton Stock: 1
- Edmonton Stock: 450
- 1% off trade
- Edmonton Stock: 329
- Edmonton Stock: 258
NMD Plastic Connector · 1/2 in · 2-Way · Grey · Kora SPC50 300PC JAR
SPC50 300PC JAR
Available to Order | Typically Arrives in 1 - 3 Weeks48 – Loyalty Rewards
