- Edmonton Stock: 198
:
from
to
Clear
Clear
Patch Panel · 48-Port Cat6 · 19 in Rack Mount with Labelled Ports · Cable Concepts Datacomm FHCD0349
SKU: FHCD0349
48-port Cat6 patch panel for structured cabling in 19 in racks and cabinets, with numbered ports, white label fields, and 568A/B compatibility. Commonly used for telecom rooms, IT closets, and commercial network terminations where clear port identification and orderly cable management matter.
What this product is for
This 48-port Cat6 patch panel is used to terminate and organise horizontal copper network cabling in structured cabling systems. It provides a central patching point for Ethernet drops in commercial offices, telecom rooms, data closets, and similar low-voltage installations.
Use for
Use it for Cat6 voice and data terminations, rack-based network distribution, and projects that need clearly identified ports for moves, adds, and changes. It fits standard 19 in racks, which is approximately 483 mm wide, and is suited to installations where technicians need front-access patching with rear termination.
Avoid for
Avoid using it where shielded system performance, Cat6A, or higher-category channel requirements are specified unless the full system design confirms compatibility. It is also not the right choice where a keystone-style modular panel or fibre termination hardware is required.
Best for
Best for commercial and institutional structured cabling jobs that need 48 copper terminations in one panel with simple port numbering and labelling. It is a practical fit for network cabinets, backboards with rack hardware, and retrofit telecom spaces.
Installed in
Typically installed in 19 in (483 mm) network racks, wall-mount rack frames, or communication cabinets. A 48-port panel is commonly selected where one panel can serve a full switch stack or a larger zone of workstation drops, helping keep patching and documentation orderly.
Why this product exists
This product gives installers a fixed termination point for Cat6 cabling so permanent links stay organised and patch cords can be changed without disturbing field cable terminations. Numbered ports and white label areas help speed identification during commissioning and service work.
Compared with similar products
Compared with smaller 12-port or 24-port panels, this 48-port model suits higher-density terminations and reduces the number of panels needed in a rack. Compared with blank keystone panels, a loaded patch panel can speed installation when a standard RJ45 copper layout is required. Typical buying guidance: choose port count based on current drops plus spare capacity for future adds. Actual layout depends on rack space, switch arrangement, bend radius, and site standards.
Specifications
- Product type: Cat6 patch panel
- Port count: 48 ports
- Connector format: RJ45 front ports
- Compatibility: 568A/B
- Rack format: 19 in (483 mm) rack mount
- Port identification: Numbered ports with white label fields
- Panel material/finish: Black painted steel panel
- Application: Structured cabling for voice and data networks
- Standards/listing: UL Listed
- Brand: Cable Concepts Datacomm
- Manufacturer part number: FHCD0349
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 553
