- Edmonton Stock: 504
:
from
to
Clear
Clear
Patch Panel · 24-Port CAT6 · Mounting Bracket Included · Cable Concepts Datacomm FHCD0325
SKU: FHCD0325
24-port CAT6 patch panel for structured cabling terminations in residential, commercial, and light data network installations. Includes a mounting bracket for rack or wall-mount support and helps keep Ethernet runs labelled, organized, and easier to service.
What this product is for
This 24-port CAT6 patch panel is used to terminate and organize multiple Ethernet cable runs at a central distribution point. It is suited to structured cabling layouts where clean port identification, front-access patching, and orderly cable management matter.
Use for
- CAT6 horizontal cable terminations
- Small office and commercial network closets
- Residential structured wiring panels
- Rack or wall-mount network distribution points
- Projects that need a mounting bracket included
Avoid for
- Applications requiring shielded patch panel construction unless the full system is specified for shielding
- Installations where a higher category or specialized performance rating is required but not confirmed
- Projects where exact rack unit, termination style, or certification details must be documented before purchase
Best for
Best for electricians, low-voltage contractors, and network installers who need a straightforward 24-port CAT6 patching point with bracketed mounting support. A 24-port format is commonly used for small to mid-size telecom rooms, office fit-ups, and residential data distribution panels.
Installed in
Typically installed in server racks, wall-mount brackets, structured media enclosures, telecom rooms, and equipment backboards. Where space planning matters, many 24-port patch panels are designed around standard 19 in rack width, approximately 483 mm, but exact dimensions should be confirmed for the final installation.
Why this product exists
A patch panel creates a fixed termination point for permanent cabling so moves, adds, and changes can be handled from the front with patch cords instead of disturbing in-wall cable. This helps reduce service time, improves labelling, and supports cleaner cable routing over the life of the installation.
Compared with similar products
Compared with smaller 12-port panels, a 24-port panel suits larger room counts or denser device layouts. Compared with blank keystone-style panels, a loaded CAT6 patch panel is typically chosen when installers want a ready-to-terminate format rather than selecting individual jacks. A mounting bracket adds flexibility for wall or rack-based installations depending on site layout.
Typical guidance only: patch panels are commonly paired with short patch cords to switches for easier service and reconfiguration. Actual layout depends on cabinet depth, bend radius, cable type, and site standards.
Specifications
- Product type: Ethernet patch panel
- Port count: 24 ports
- Category: CAT6
- Included accessory: Mounting bracket
- Application: Structured cabling and Ethernet cable organization
- Colour: Black painted steel panel with white port marking areas, based on distributor listing
- Port identification: Numbered ports for labelling and identification, based on distributor listing
- Installation environment: Residential, commercial, and light network infrastructure
Specification details above are based on available manufacturer/distributor-style listings. Confirm exact dimensions, rack height, and termination details before ordering for engineered network projects.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
GFCI Receptacle · 20A 125V 5-20R · Tamper-Resistant Self-Test · Hubbell GFRTR20W
GFRTR20W
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse20 – Loyalty Rewards- Edmonton Stock: 270
