:
from
to
Clear
Clear
Ethernet Tool Kit · 9-Piece · RJ45/RJ11 Crimping, Testing and Punch Down Set · Cable Concepts Datacomm TOCD0496
SKU: TOCD0496
9-piece Ethernet installation and test kit for RJ45 and RJ11 terminations, including a crimping tool, cable tester, punch down tool, strippers and 10 RJ45 connectors. Commonly used for Cat5 and Cat5e network cable installation, troubleshooting and basic service work.
What this product is for
This 9-piece Ethernet tool kit is used for terminating, stripping, testing and troubleshooting low-voltage network cabling. It is suited to electricians, datacom installers and maintenance staff working on RJ45 and RJ11 cable ends, patch leads and basic structured cabling service tasks.
Use for
- Crimping RJ45, RJ11 and RJ12 connectors
- Testing cable continuity, opens, shorts and miswires on network and telephone-style cables
- Punching down conductors at jacks, blocks or similar terminations
- Stripping UTP/STP and compatible communication cable jackets
- Small network moves, adds, changes and repair work
Avoid for
- Certified cable performance testing for Cat6A, Cat7 or higher installations
- PoE load testing or network qualification work requiring advanced testers
- Heavy production termination where a ratcheting or professional-grade dedicated tool is preferred
Best for
Best for contractors and service technicians who need a compact starter kit for common Ethernet and telephone-style terminations. This type of kit is typically chosen for light commercial, residential and maintenance work where basic install and fault-finding tools are needed in one case.
Installed in
Used in offices, retail spaces, homes, telecom rooms, low-voltage panels, patching areas and renovation projects where Cat5/Cat5e or similar communication cabling is being installed or serviced.
Why this product exists
Instead of sourcing individual hand tools, this kit groups the common items needed to terminate and check network cable on site. It helps reduce setup time for basic datacom work and keeps service tools together in one carry case.
Compared with similar products
Compared with a single crimp tool, this kit adds a cable tester, punch down tool, multiple strippers and starter RJ45 connectors for broader field use. Compared with advanced certification kits, it is a lower-cost option intended for basic installation and troubleshooting rather than standards certification. As typical guidance, a basic continuity tester helps confirm pin-to-pin wiring, but actual network performance depends on cable category, termination quality, installation practice and applicable code or project requirements.
Specifications
- Kit type: Ethernet/network installation tool kit
- Piece count: 9-piece kit
- Supported connector types: RJ45, RJ11, RJ12
- Typical cable applications: Cat5 and Cat5e with 8P8C plugs
- Crimp tool size: 7.8 in (approximately 198 mm)
- Punch down tool size: 7 in (approximately 178 mm)
- UTP/STP stripper size: 4.3 in (approximately 109 mm)
- Tester function: continuity and fault indication for opens, shorts and incorrect connections
- Remote test length: up to 1000 ft (approximately 305 m)
- Tester power: 9V battery, not included
- Included items: 3-in-1 crimping/cutting/stripping tool, RJ45/RJ11 cable tester, punch down tool, 10 RJ45 connectors with storage box, 4P/6P/8P stripping knife, RG56/RG58/RG59 cable stripper, multifunction UTP/STP stripper, Phillips screwdriver, slotted screwdriver, carry case
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Aluminium Mechanical Lug · 6 AWG to 350 kcmil · 1 Conductor 1 Hole · Techspan LA350
LA350
Available to Order | Typically Arrives in 1 - 3 Weeks Ships From Burnaby BC Factory Warehouse18 – Loyalty Rewards- Edmonton Stock: 4
- Stock in BC
Square Nut · 5/8 in · Hot-Dip Galvanized Steel · Hydel 58NS
58NS
47 In British Columbia Warehouse As Of July 24th, 20265 – Loyalty Rewards
