Multi-Function Wire Stripper, Cutter and Crimper · 8-22 AWG · Hand Tool · Cable Concepts Datacomm TOCD0035
What this product is for
This multi-function hand tool is used for stripping insulation, cutting wire, and crimping terminals on conductors from 8-22 AWG. It fits network, telecom, security, AV, and other low-voltage installation work where technicians need one tool for routine wire preparation.
Use for
Use for stripping and cutting small-gauge conductors, basic crimping tasks, service calls, panel clean-up, and low-voltage cable terminations. It is commonly used in tool bags for Cat cable, telecom pairs, alarm wiring, speaker wire, and similar installer work.
Avoid for
Avoid using this tool where a dedicated ratcheting crimper, precision data termination tool, or connector-specific crimp die is required. It is also not the right choice for large-gauge power conductors or applications that call for manufacturer-specific termination tooling.
Best for
Best for electricians, data contractors, telecom installers, and maintenance teams who want one compact tool for common strip-cut-crimp tasks. It suits general bench work, service kits, and light installation work where speed and convenience matter more than connector-specific tooling.
Installed in
Typically used on site in telecom rooms, network closets, commercial fit-ups, residential structured wiring, security installations, and service vehicles. As a hand tool, it is carried rather than installed.
Why this product exists
This tool combines three common functions into one format so installers can reduce the number of hand tools carried for everyday low-voltage work. For many service and trim-out tasks, that means faster wire prep and fewer tool changes.
Compared with similar products
Compared with a dedicated wire stripper, this style gives added cutting and crimping capability in one tool. Compared with a ratcheting crimper, it is more compact but typically better suited to general-purpose crimping rather than connector-specific production work. As a rule of thumb, combination tools are commonly chosen for service calls and mixed-task kits, while dedicated tools are preferred for repetitive terminations. Actual results depend on wire type, connector style, and installation conditions.
Specifications
- Product type: Multi-function wire stripper, cutter, and crimper
- Manufacturer part number: TOCD0035
- Brand: Cable Concepts Datacomm
- Wire range: 8-22 AWG
- Application: Low-voltage, data, telecom, AV, and general wire preparation
- Functions: Strip, cut, and crimp
- Tool style: Manual hand tool
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.