1713 lm LED vapour-tight jelly jar wall mount · 20W 3000K 120-277V IP65 · frosted glass lens, grey housing · NaturaLED LED-FXVTJ20/830/MV-WM
What this product is for
This LED vapour-tight jelly jar wall-mount fixture is used for outdoor and industrial lighting where moisture, dust, and washdown resistance matter. It provides 1713 lumens of 3000K light from a 20W LED source and is built with a die-cast aluminium housing and frosted glass lens.
Use for
Use over doorways, service entrances, walkways, utility areas, scaffolding, construction areas, and similar wall-mounted locations that need a compact wet-location style fixture. The 120-277V input suits many residential, commercial, and light industrial installations.
Avoid for
Avoid using this fixture where a photocell, motion sensor, or dimming control is required, as listed product data indicates no photocell, no sensor, and non-dimming operation. It is also not the right choice where a wide-area flood or high-bay distribution is needed.
Best for
Best for electricians and maintenance teams replacing older 150W incandescent or approximately 70W HID jelly jar fixtures with a lower-wattage LED alternative. As a rule of thumb, 3000K is commonly used where a warmer exterior appearance is preferred over cooler commercial colour temperatures.
Installed in
Typically installed on exterior walls in commercial buildings, industrial facilities, service corridors, utility rooms, and covered outdoor areas. The fixture includes four 1/2 in conduit entries for wiring flexibility.
Why this product exists
This product exists to provide a compact vapour-tight wall fixture that reduces maintenance compared with legacy incandescent or HID units. The rated life is 50,000 hours typical, helping reduce relamping frequency. Actual service life depends on switching cycles, ambient temperature, and installation conditions.
Compared with similar products
Compared with open-lamp jelly jar fixtures, this enclosed IP65 unit offers better protection against dust and water ingress. Compared with larger vapour-tight linear fixtures, it is better suited to entry points and localized wall-mount applications rather than broad area lighting.
Specifications
- Brand: NaturaLED
- Manufacturer part number: LED-FXVTJ20/830/MV-WM
- Order code: 7604
- Product type: LED vapour-tight jelly jar wall mount
- Light output: 1713 lm
- Wattage: 20W
- Colour temperature: 3000K
- CRI: 80
- Input voltage: 120-277V
- Frequency: 50/60 Hz
- Ingress protection: IP65
- Surge protection: 2 kV
- Housing material: die-cast aluminium
- Lens: frosted glass diffuser
- Finish: grey/silver
- Mounting: wall mount
- Conduit entries: four 1/2 in
- Operating temperature: -4°F to 122°F (-20°C to 50°C)
- Dimensions: 7.67 x 1.80 x 11.52 in (approximately 195 x 46 x 293 mm)
- Weight: 3.80 lb (approximately 1.7 kg)
- Listings: ETL Listed
- Dimming: No
- Photocell: No
- Sensor: No
- Rated life: 50,000 hours
- Warranty: 5 years
Typical replacement guidance only: this fixture is commonly used in place of 150W incandescent or approximately 70W HID jelly jar fixtures. Actual light levels depend on mounting height, spacing, surface reflectance, and site conditions.
- BrandNaturaLED
- Warranty5 years
- Light
- Lumen Output Min/Max1713
- Watts Min/Max20W
- LED Color3000K
- CRI80+
- Power
- Volts120/277V
- DimmingNon Dim
- Dimensions
- Size and Shape4" Jar
- Height11.52"
- Depth7.67"
- Diameter4.67"
- Installation
- Mounting TypeJunction Box
- RatingsIP65
- Characteristics
- FinishGrey
- Rated Life50,000 Hrs
- Operating Temperature-20°C to 50°C / -4°F to 122°F
- StandardsEnergy Star
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.