- Edmonton Stock: 12
20 Watt 12V DC Dimmable Magnetic Driver · ML20S12DC
20W magnetic LED driver with 12V DC output for dimmable low-voltage LED loads. Commonly used for LED ribbon, accent, and landscape lighting where a Class 2 magnetic driver and phase-cut dimming are required.
What this product is for
This 20W magnetic LED driver converts 120V input power to 12V DC output for compatible low-voltage LED lighting systems. It is intended for dimmable constant-voltage applications such as LED ribbon, accent lighting, and certain landscape or architectural lighting layouts.
Use for
Use for 12V DC LED loads that require a magnetic Class 2 driver and dimming control. Typical applications include short LED ribbon runs, under-cabinet lighting, display lighting, and low-voltage outdoor lighting where the fixture or tape is designed for 12V DC operation.
Avoid for
Avoid using this driver with 24V DC products, constant-current LED modules, or loads that exceed 20W. Do not assume compatibility with every dimmer or every LED fixture without checking the fixture and control requirements first.
Best for
Best for smaller 12V DC lighting runs where electricians need a compact magnetic driver with dimming capability. It is a practical choice when replacing an existing magnetic low-voltage driver or matching a system designed around phase-cut dimming.
Installed in
Typically installed in residential and light commercial projects, including millwork lighting, display shelving, soffits, under-cabinet runs, and some outdoor low-voltage lighting assemblies. The enclosure is approximately 7 in x 2.11 in x 1.54 in (178 x 54 x 39 mm), which helps when planning mounting space.
Why this product exists
This driver is used to supply stable 12V DC power to dimmable low-voltage LED systems from a 120V branch circuit. Magnetic drivers are commonly selected where the lighting design or dimming method calls for magnetic low-voltage style performance and a Class 2 power supply.
Compared with similar products
Compared with higher-wattage magnetic drivers, this 20W model is better suited to smaller loads and tighter spaces. As a rule of thumb, size the connected LED load below the driver maximum to allow operating headroom; actual loading depends on fixture type, run length, and installation conditions. Actual performance depends on installation conditions, dimmer compatibility, layout, and local electrical code.
Specifications
- Manufacturer part number: ML20S12DC
- Brand: Axite Lighting Inc
- Product type: Magnetic LED driver
- Input: 120V
- Output: 12V DC
- Maximum load: 20W
- Dimming: Phase-cut dimmable; compatible dimmer type should be verified before installation
- Class rating: Class 2
- Enclosure finish: Black powder-coated steel
- Mounting: Post or wall mount
- Location: Outdoor
- Dimensions: 7 in x 2.11 in x 1.54 in (178 x 54 x 39 mm)
- Weight: 1.9 lb (0.86 kg)
- Input leads: 18 AWG, 600V
- Output leads: 18 AWG, 300V
- Lead temperature rating: 105°C
- Warranty: 5 years
- Watts20W
- FinishBlack
- Mounting TypePost or Wall Mount
- Volts12V DC
- TypeMagnetic
- LocationOutdoor
- Height7"
- Width2.11"
- Depth1.54"
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 5
3 w/ft Outdoor Accent LED Strip - 238 lm/ft · 2700K · 12V · 16 ft
EV3-OUT-16-12V-2700
112 – Loyalty Rewards- Edmonton Stock: 1
60 Watt 12V DC Dimmable Magnetic Driver ML60S12DC
ML60S12DC
Available to Order | Typically Arrives in 1 - 3 Weeks From California USA159 – Loyalty Rewards- Edmonton Stock: 3
- Edmonton Stock: 9
- Edmonton Stock: 18
- Edmonton Stock: 4
- Edmonton Stock: 3














